The effect of bentonite clay on green compression strength for tailing sands from old tin mines in Perak state, Malaysia for making green sand casting mould

by Abdullah, Azhar, Sulaiman, Shamsuddin, Baharudin, B. T. Hang Tuah, Mohd Ariffin, Mohd Khairol Anuar, Vijayaram, Thoguluva Raghavan
Published 2011

A new method to improve passenger vehicle safety using intelligent functions in active suspension system

by Mohd Ariffin, Mohd Khairol Anuar, Rezanoori, Alireza, Zulkefli, Zamir Aimaduddin, Abdul Jalil, Nawal Aswan, Delgoshaei, Aidin
Published 2019

Effects of integration on the cost reduction in distribution network design for perishable products

by Firoozi, Zahra, Ismail, Napsiah, Ariafar, Shahram, Tang, Sai Hong, Mohd Ariffin, Mohd Khairol Anuar, Mamariani, A.
Published 2014

A comprehensive 3-phase framework for determining the customer’s product usage in a food supply chain

by Mad Ali, Mohd Fahmi, Mohd Ariffin, Mohd Khairol Anuar, Delgoshaei, Aidin, Mustapha, Faizal, Supeni, Eris Elianddy
Published 2022

Investigation of microstructure and mechanical properties of friction stir lap welded AA6061-T6 in various welding speeds

by Fadaeifard, Firouz, Gharavi, Farhad, Matori, Khamirul Amin, Daud, Abdul Razak, Mohd Ariffin, Mohd Khairol Anuar, Awang, Mokhtar
Published 2013

Mechanical moulding properties of tailing sand-clay mixture from Batu Gajah, Perak, Malaysia

by Abdullah, Azhar, Sulaiman, Shamsuddin, Baharudin, B. T. Hang Tuah, Mohd Ariffin, Mohd Khairol Anuar, Abdul Hamid, Nor Haliza
Published 2012

Mechanical properties of tin tailing sand-clay mixture from Batu Gajah, Perak, Malaysia for making greensand casting mould

by Abdullah, Azhar, Sulaiman, Shamsuddin, Baharudin, B. T. Hang Tuah, Mohd Ariffin, Mohd Khairol Anuar, Abdul Hamid, Nor Haliza
Published 2014

A CFD study of turbulent heat transfer and fluid flow through the channel with semicircle rib

by Togun, Hussein, Abdulrazzaq, Tuqa, Newaz, Kazi Md. Salim, Mohamad Badry, Ahmad Badarudin, Mohd Ariffin, Mohd Khairol Anuar
Published 2013

A study on properties of polymer-based additive manufacturing

by Wahid, Zaliha, Mohd Ariffin, Mohd Khairol Anuar, Baharudin, B. T. Hang Tuah, Mustapha, Faizal, Ismail, Mohd Idris Shah
Published 2019

Mechanical vibration technique for enhancing mechanical properties of particulate reinforced aluminium alloy matrix composite

by M. Sayuti, Sulaiman, Shamsuddin, Baharudin, B. T. Hang Tuah, Mohd Ariffin, Mohd Khairol Anuar, Sulaiman, Suraya, Esmaeilian, Gholamreza
Published 2011

Effect of elastic module degradation measurement in different sizes of the nonlinear isotropic–kinematic yield surface on springback prediction

by Baara, Wisam Ali Basher, Baharudin, B. T. Hang Tuah, Mohd Ariffin, Mohd Khairol Anuar, Ismail, Mohd Idris Shah
Published 2019

Design and simulation on investment casting mold for metal matrix composite material

by Sahroni, Taufik Roni, Sulaiman, Shamsuddin, Baharudin, B. T. Hang Tuah, Mohd Ariffin, Mohd Khairol Anuar, Arep @ Ariff, Hambali
Published 2011

Recent developments in metamodel based robust black-box simulation optimization: an overview

by Parnianifard, Amir, Ahmad, Siti Azfanizam, Mohd Ariffin, Mohd Khairol Anuar, Ismail, Mohd Idris Shah, Ebrahim, Nader Ale
Published 2019

Effect of chip load and spindle speed on cutting force of Hastelloy X

by Mohd Nor, Nor Aznan, Baharudin, B. T. Hang Tuah, Ghani, Jaharah, Leman, Zulkiflle, Mohd Ariffin, Mohd Khairol Anuar
Published 2020

Design of true hybrid solar wind turbine for smaller hybrid renewable energy power plants

by Al-Ajmi, Mohammad, Muda, Mohd Khairul Hafiz, Abdul Halin, Izhal, Mustapha, Faizal, Mohd Ariffin, Mohd Khairol Anuar
Published 2020

Experimental Investigation on Friction Drilling of Stainless Steel AISI 304

by Dehghan, Shayan, Ismail, Mohd Idris Shah, Mohd Ariffin, Mohd Khairol Anuar, Baharudin, B.T. Hang Tuah, Parnianifard, Amir
Published 2019

Design and fabrication of a student competition based racing car

by Abdul Aziz, Faieza, Salit, Mohd Sapuan, Mohd Ariffin, Mohd Khairol Anuar, Baharudin, B. T. Hang Tuah, Supeni, Eris Elianddy
Published 2009

Thermal investigation of aluminium - 11.8% silicon (LM6) reinforced SiO2 - particles

by Mohd Sayuti, Sulaiman, Suraya, Sulaiman, Shamsuddin, Vijayaram, Thoguluva Raghavan, Mohd Ariffin, Mohd Khairol Anuar, Baharudin, B. T. Hang Tuah
Published 2011

Improvement of Tops Spinning manufacturing with CNC Lathe

by Sulaiman, Shamsuddin, Tang, Sai Hong, Pawanchi, Sohaimi, Esmaeilian, Gholamreza, Mohd Ariffin, Mohd Khairol Anuar, Baharudin, B. T. Hang Tuah
Published 2011

Evaluation of combined treatments of natural fibers: kenaf, abaca and oil palm fibers using micromechanical and SEM methods

by Sreenivasan, Subramaniasarma, Ibraheem, Sameer Adnan, Sulaiman, Shamsuddin, Baharudin, B. T. Hang Tuah, Mohd Ariffin, Mohd Khairol Anuar, Abdan, Khalina
Published 2014