Review of extraction of silica from agricultural wastes using acid leaching treatment

by Faizul, Che Pa, Md Fazlul, Bari, Abdullah, C.
Published 2014

Treated oil palm ash as precursor in the zeolite synthesis

by Faizul, Che Pa, Abdullah, Chik, Md. Fazlul, Bari
Published 2019

Palm Ash as an Alternative Source for Silica Production

by Faizul, Che Pa, Abdullah, Chik, Md. Fazlul, Bari
Published 2020

Solid state sintering of Co-Cr-Mo (F 75): Microstructure and properties

by Shamsul Baharin, Jamaludin, Zuraidawani, Che Daud, Md. Fazlul, Bari
Published 2011

Preparations and biomedical applications of magnetic nanoparticles and nanocomposites

by Md. Eaqub, Ali, Md. Fazlul, Bari, Mohd Noor, Ahmad
Published 2010

The influence of sintering temperature to the physical properties of P/M Co-Cr-Mo (F-75) alloy

by Zuraidawani, Che Daud, Shamsul Baharin, Jamaludin, Md. Fazlul, Bari
Published 2010

Extraction and separation of Cu(II), Ni(II) and Zn(II) by sol-gel silica immobilized with Cyanex 272

by Fazlul Bari, Noorzahan, Begum, Kamarudin, Hussin, Samsul Baharin, Jamaludin
Published 2009

Effect of pH and salt concentration on protein solubility of slaughtered and non-slaughtered broiler chicken meat

by Mst Kamrun Nahar, Zarina Zakaria, Uda Hashim, Md Fazlul Bari
Published 2017

Synthesis of sol-gel silica chemically bonded with cyanex 272 for the removal of Cu(II), Ni(II), and Zn(II)

by Md Fazlul, Bari, Noorzahan, Begum, Shamsul Baharin, Jamaludin, Kamarudin, Hussin
Published 2009

Selective leaching for the recovery of Copper from PCB

by Md Fazlul, Bari, Noorzahan, Begum, Shamsul Baharin, Jamaludin, Kamarudin, Hussin
Published 2010

NanoDNA chip for the detection of porcine derivatives in halal products

by Md. Eaqub, Ali, Uda, Hashim, Prof. Dr., Md. Fazlul, Bari, Dr.
Published 2012

Corrosion behaviour of Co-Cr-Mo alloys fabricated by powder metallurgy route

by Zuraidawani, Che Daud, Shamsul Baharin, Jamaludin, Prof. Dr., Mohd Fazlul, Bari
Published 2011

Kinetics of Sm3+ extraction by BTMPPA using single drop technique

by Md Fazlul Bari, Foo Hing, Heong, Muhammad Idris, Salleh, Bahruddin, Saad
Published 2009

Extraction mechanism of Gd3+ by BTMPPA

by Md Fazlul, Bari, Bahruddin, Saad, Ismail, Abdur Rahman, Muhammad Idris, Salleh
Published 2009

Characterization of Co-Cr-Mo (F-75) alloy produced by solid state sintering

by Zuraidawani, Che Daud, Shamsul Baharin, Jamaludin, Prof. Dr., Fazlul, Bari, Dr.
Published 2010

Microstructure and properties of Co-Cr-Mo alloy as a function of isothermal holding time

by Zuraidawani, Che Daud, Shamsul Baharin, Jamaludin, Prof. Dr., Md. Fazlul, Bari, Dr.
Published 2012

Characterization of Co-Cr-Mo (F-75) alloy produced by solid state sintering

by Zuraidawani, Che Daud, Shamsul Baharin, Jamaludin, Prof. Dr., Md. Fazlul, Bari, Dr.
Published 2011

The influence of welding parameters and corrosive environment on the joint strength of resistance spot-welded mild steel sheets

by Shamsul Baharin, Jamaludin, Ahmad Latiffi, A. A. T., Khairel Rafezi, Ahmad, Fazlul, Bari
Published 2010

Extraction of silica from palm ash using citric acid leaching treatment: Preliminary result

by Faizul, Che Pa, Abdullah, Chik, Prof. Madya Dr., Md Fazlul, Bari, Dr.
Published 2014

Extraction of silica from palm ashvia citric acid leaching treatment

by Faizul, Che Pa, Abdullah, Chik, Prof. Madya Dr., Md Fazlul, Bari, Dr.
Published 2014