Modeling of the effects of athermal flow strength and activation energy for dislocation glide an the nanoindentation creep of nickel thin film at room temperature

by Haseeb, A.S. Md. Abdul
Published 2006

Implementation of micro-level problem based learning in a course on electronic materials

by Haseeb, A.S. Md. Abdul
Published 2011

Effect of Pedestal Temperature on Bonding Strength and Deformation Characteristics for 5N Copper Wire Bonding

by Singh, G., Haseeb, A.S. Md. Abdul
Published 2016

Studies on electrodeposition behavior of Sn–Bi alloys in plating baths modified by hydroquinone and gelatin

by Goh, Y., Haseeb, A.S. Md. Abdul
Published 2016

Production and purification of zircon opacifier from zircon found in the coastal area of Bangladesh

by Naher, Sumsun, Haseeb, A.S. Md. Abdul
Published 2008

LIGA fabrication of nanocrystalline Ni–W alloy micro specimens from ammonia-citrate bath

by Haseeb, A.S. Md. Abdul, Bade, Klaus
Published 2008

A technical note on the production of zirconia and zircon brick from locally available zircon in Bangladesh

by Naher, Sumsun, Haseeb, A.S. Md. Abdul
Published 2006

Effects of addition of copper particles of different size to Sn-3.5Ag solder

by Nadia, A., Haseeb, A.S. Md. Abdul
Published 2012

Effects of Co nanoparticle addition to Sn-3.8Ag-0.7Cu solder on interfacial structure after reflow and ageing

by Haseeb, A.S. Md. Abdul, Leng, T.S.
Published 2011

Application of laser heating and its effects on bonding strengths for varied copper wire purity levels

by Singh, Gurbinder, Haseeb, A.S. Md. Abdul
Published 2018

Influence of laser power on bonding strength for low purity copper wire bonding technology

by Singh, Gurbinder, Haseeb, A.S. Md. Abdul
Published 2019

Soldering Characteristics and Mechanical Properties of Sn-1.0Ag-0.5Cu Solder with Minor Aluminum Addition

by Leong, Y.M., Haseeb, A.S. Md. Abdul
Published 2016

Intermixing reactions in electrodeposited Cu/Sn and Cu/Ni/Sn multilayer interconnects during room temperature and high temperature aging

by Chia, P.Y., Haseeb, A.S. Md. Abdul
Published 2015

Response of Ti-6Al-4V and Ti-24Al-11Nb alloys to dry sliding wear against hardened steel

by Alam, Md. Ohidul, Haseeb, A.S. Md. Abdul
Published 2002

Physical and chemical characteristics of commercially available brake shoe lining materials: a comparative study

by Morshed, Muhammad Monzur, Haseeb, A.S. Md. Abdul
Published 2004

Improving mechanical and electrical properties of Cu/SAC305/Cu solder joints under electromigration by using Ni nanoparticles doped flux

by Bashir, Muhammad Nasir, Haseeb, A.S. Md. Abdul
Published 2018

Structural investigations on nanocrystalline Ni-W alloy films by transmission electron microscopy

by Klimenkov, Michael, Haseeb, A.S. Md. Abdul, Bade, Klaus
Published 2009

Friction and wear characteristics of electrodeposited nanocrystalline nickel-tungsten alloy films

by Haseeb, A.S. Md. Abdul, Albers, U., Bade, Klaus
Published 2008

Thermal decomposition study of electrodeposited Fe-C and Fe-Ni-C alloys by differential scanning calorimetry

by Haseeb, A.S. Md. Abdul, Arita, M., Hayashi, Y.
Published 2001

Preparation and low-temperature sintering of cu nanoparticles for high-power devices

by Krishnan, S., Haseeb, A.S. Md. Abdul, Johan, M.R.
Published 2012