Compressive properties of additively manufactured functionally graded kagome lattice structure

由 Gautam, Rinoj, Idapalapati, Sridhar
出版 2019

Performance of strut-reinforced Kagome truss core structure under compression fabricated by selective laser melting

由 Gautam, Rinoj, Idapalapati, Sridhar
出版 2019

Thermo-mechanical debonding map for repairing composite–metal adhesive joints

由 Srinivasan, Dharun Vadugappatty, Idapalapati, Sridhar
出版 2021

Effect of scarf repair geometry on the impact performance of aerospace composites

由 Shankar, Sridharan Vijay, Idapalapati, Sridhar
出版 2023

Failure Mode Analysis Of Kagome Lattice Structures

由 Rinoj, Gautam, Idapalapati, Sridhar, Feih, Stefanie
出版 2016

Three-dimensional topography modelling of regular prismatic grain coated abrasive discs

由 Arunachalam, Adhithya Plato Sidharth, Idapalapati, Sridhar
出版 2020

Printing and characterisation of Kagome lattice structures by fused deposition modelling

由 Gautam, Rinoj, Idapalapati, Sridhar, Feih, Stefanie
出版 2020

Influence of residual stress distribution and microstructural characteristics on fatigue failure mechanism in Ni-based Superalloy

由 Kumar, Dharmesh, Idapalapati, Sridhar, Wang, Wei
出版 2022

Microstructural response and strain hardening in deep cold rolled nickel-based superalloy for aerospace application

由 Kumar, Dharmesh, Idapalapati, Sridhar, Wei, Wang
出版 2018

Material removal analysis for compliant polishing tool using adaptive meshing technique and Archard wear model

由 Arunachalam, Adhithya Plato Sidharth, Idapalapati, Sridhar
出版 2020

Enhanced cooling rates in laser directed energy deposition with interlayer peening

由 Mithal, Abeer, Maharjan, Niroj, Idapalapati, Sridhar
出版 2023

Microstructural evolution in laser-based directed energy deposition of 316 L stainless steel with interlayer deformation

由 Mithal, Abeer, Maharjan, Niroj, Idapalapati, Sridhar
出版 2024

Failure analysis of GFRP single lap joints tailored with a combination of tough epoxy and hyperelastic adhesives

由 Srinivasan, Dharun Vadugappatty, Ravichandran, Vignesh, Idapalapati, Sridhar
出版 2020

Temperature-dependent peel performance of adhesively rebonded hybrid joints

由 Srinivasan, Dharun Vadugappatty, Aggarwal, Atin, Idapalapati, Sridhar
出版 2020

Flatwise compression and local indentation response of 3D-printed strut-reinforced Kagome with polyurethane filling

由 Gautam, Rinoj, Sridharan, Vijay Shankar, Idapalapati, Sridhar
出版 2022

Comparative study of composite scarf and strap joints for equivalent repair signature under uniaxial tension

由 Srinivasan, Dharun Vadugappatty, Padma, S. Ravisankar, Idapalapati, Sridhar
出版 2022

Processing and characterization of tailorable 3D-printed acrylonitrile butadiene styrene composites with hybrid buckypapers

由 Gackowski, Bartosz Mikolaj, Sharma, Mohit, Idapalapati, Sridhar
出版 2022

Static and fatigue debond resistance between the composite facesheet and Al cores under Mode-1 in sandwich beams

由 Selvam, Vignesh, Sridharan, Vijay Shankar, Idapalapati, Sridhar
出版 2022

A numerical and experimental study of distribution of the residual stress on the shot peened low alloy steel

由 Trung, Pham Quang, Butler, David Lee, Idapalapati, Sridhar
出版 2019

Design of Alporas aluminum alloy foam cored hybrid sandwich plates using Kriging optimization

由 Lim, Yee Wei, Choi, Hae-Jin, Idapalapati, Sridhar
出版 2014