Modeling for surface roughness in end-milling of Titanium alloy Ti-6Al-4V using uncoated WC-Co inserts

by Amin, A. K. M. Nurul, Ginta, Turnad Lenggo, Ishtiyaq, M. H.
Published 2011

Comparison of surface roughness in end milling of titanium alloy Ti-6Al-4V using uncoated WC-Co and PCD inserts through generation of models

by Ginta, Turnad Lenggo, Amin, A. K. M. Nurul, Ishtiyaq, M. H.
Published 2011

A coupled artificial neural network and RSM model for the prediction of chip serration frequency in end milling of Inconel 718

by Patwari, Muhammed Anayet Ullah, Amin, A. K. M. Nurul, Ishtiyaq, M. H.
Published 2011

Application of response surface methodology coupled with genetic algorithm in the optimization of cutting conditions for surface roughness in end milling of Inconel 718 using coate...

by Ishtiyaq, M. H., Amin, A. K. M. Nurul, Patwari, Muhammed Anayet Ullah
Published 2011

Mathematical model of chip serration frequency in end milling of Inconel 718

by Patwari, Muhammed Anayet Ullah, Amin, A. K. M. Nurul, Faris, Waleed Fekry, Ishtiyaq, M. H.
Published 2008

Investigations of formation of chatter in a non-wavy surface during thread cutting and turning operations

by Anayet Ullah Patwari, Mohammed, Amin, A. K. M. Nurul, Faris, Waleed Fekry, Ishtiyaq, M. H.
Published 2010

Modeling for surface roughness in end-milling of titanium alloy Ti-6AI-4V using uncoated WC-Co and PCD Inserts

by Ginta, Turnad Lenggo, Amin, A. K. M. Nurul, Karim, A.N. Mustafizul, Ishtiyaq, M. H.
Published 2007

Investigation of the machinability of Inconel 718 in room temperature and preheated conditions

by Amin, A. K. M. Nurul, Majed, A. Fakhruzi, Daud, M. K., Patwari, Md Anayet Ullah, Ishtiyaq, M. H.
Published 2011

Application of response surface methodology coupled with genetic algorithm in the optimization of cutting conditions for surface roughness in end-milling of Inconel 718 using coate...

by Ishtiyaq, M. H., Amin, A. K. M. Nurul, Karim, A.N. Mustafizul, Ginta, Turnad Lenggo, Patwari, Muhammed Anayet Ullah
Published 2007