An influence of a binder system to the rheological behavior of the SS16l metal injection molding (MIM) feedstock

by Jamaludin, Khairur Rijal, Muhamad, Norhamidi, Abolhasani, Hooman, Murtadhahadi, Murtadhahadi, Ab. Rahman, Mohd. Nizam
Published 2009

An influence of a binder system to the rheological behavior of the SS316l Metal Injection Molding (MIM) feedstock

by Jamaludin, Khairur Rijal, Muhamad, Norhamidi, Abolhasani, Hooman, Murtadhahadi, Murtadhahadi, Ab. Rahman, Mohd. Nizam
Published 2011

Rheological behavior of SS316l gas atomized powder in bimodal particle size distribution in a composite binder system

by Jamaludin, Khairur Rijal, Muhamad, N., Amin, S. Y. M., Ab. Rahman, M. N., Murtadhahadi, Murtadhahadi
Published 2008

Feedstock characterisation of titanium alloy mix with palm stearin binder system for metal injection moulding

by Mohamad Nor, Nor Hafiez, M., Norhamidi, Ahmad, Sufizar, Ibrahim, Mohd. Halim I., Murtadhahadi, Murtadhahadi, Jamaludin, Khairur Rijal
Published 2009

Rheological investigation of water atomized metal injection molding (MIM) feedstock for processibility prediction

by Jamaludin, Khairur Rijal, Muhamad, Norhamidi, Rahman, M. N. A., Murtadhahadi, Murtadhahadi, Ahmad, S., Ibrahim, M. H. I., Nor, N. H. M.
Published 2010

Characterisation of Titanium Foams Sintered at Different Temperatures Prepared by the Slurry Method

by Ahmad, Sufizar, Muhamad, Norhamidi, Muchtar, A., Sahari, J., Jamaludin, Khairur Rijal, Ibrahim, M. H. I., Mohamad Nor, N. H., Murtadhahadi, Murtadhahadi
Published 2010

Performance of solvent debinding using design of experiment method

by Jamaludin, Khairur Rijal, Muhamad, Norhamidi, Rahman, M. N. A. B., Amin, Sri Yulis M., Ahmad, Sufizar, Ibrahim, Mohd. Halim Irwan, Murtadhahadi, Murtadhahadi
Published 2009

A review of workability of wrought magnesium alloys

by Harun, Mohd. Ruzi, Muhamad, Norhamidi, S., Abu Bakar, Jamaludin, Khairur Rijal, M. N., Nor Hafiez, Ahmad, Sufizar, Ibrahim, Mohd. Halim I., Murtadhahadi, Murtadhahadi
Published 2009

Kesan suhu penyuntikan yang tidak optimum terhadap kecacatan jasad anum pada proses penyuntikan logam (MIM)

by Muhamad, Norhamidi, Murtadhahadi, Murtadhahadi, Che Haron, Che Hassan, Sulong, Abu Bakar, Jamaludin, Khairur Rijal, Ahmad, Sufizar, Ibrahim, Mohd. Halim Irwan, Mohamad Nor, Nor Hafiez
Published 2008

Pembebanan serbuk yang optimum bagi bahan suapan daripada SS 316 L, PEG, PMMA dan AS bagi proses pengacuanan suntikan logam (MIM)

by Muhamad, Norhamidi, Murtadhahadi, Murtadhahadi, Che Harun, Che Hassan, Sulong, Abu Bakar, Jamaludin, Khairur Rijal, Ahmad, Sufizar, Ibrahim, Mohd. Halim Irwan, Mohamad Nor, Nor Hafiez
Published 2008

Moulding parameter optimisation for the best sintered density

by Jamaludin, Khairur Rijal, Muhamad, Norhamidi, Ab. Rahman, Mohd. Nizam, M. Amin, Sri Yulis, Ahmad, Sufizar, Ibrahim, Mohd. Halim Irwan, Murtadhahadi, Murtadhahadi, Mohamad Nor, Nor Hafiez
Published 2009

Pengaruh tekanan penyuntikan, suhu penyuntikan dan beban serbuk terhadap ketumpatan jasad anum: analisis varian

by Jamaludin, Khairur Rijal, Muhamad, Norhamidi, Ab. Rahman, Mohd. Nizam, M. Amin, Sri Yulis, Ahmad, Sufizar, Ibrahim, Mohd. Halim Irwan, Murtadhahadi, Murtadhahadi, Mohamad Nor, Nor Hafiez
Published 2008

Analisis taburan saiz partikel serbuk SS316L bagi kegunaan proses penyuntikan acuan logam

by Jamaludin, Khairur Rijal, Muhamad, Norhamidi, Ab. Rahman, Mohd. Nizam, M. Amin, Sri Yulis, Ahmad, Sufizar, Ibrahim, Mohd. Halim Irwan, Murtadhahadi, Murtadhahadi, Mohamad Nor, Nor Hafiez
Published 2008

Kajian prestasi penyahikatan larutan dengan menggunakan kaedah taguchi

by Jamaludin, Khairur Rijal, Muhamad, Norhamidi, Ab. Rahman, Mohd. Nizam, M. Amin, Sri Yulis, Ahmad, Sufizar, Ibrahim, Mohd. Halim Irwan, Murtadhahadi, Murtadhahadi, Mohamad Nor, Nor Hafiez
Published 2008

An influence of the SS316L powder particle shape to the densification of metal injection moulding (MIM) compact

by Jamaluddin, Khairur Rijal, Muhamad, Norhamidi, Ab. Rahman, Mohd. Nizam, M. Amin, Sri Yulis, Ahmad, Sufizar, Ibrahim, Mohd. Halim Irwan, Murtadhahadi, Murtadhahadi, Mohamad Nor, Nor Hafiez
Published 2008

Pengoptimuman parameter pengacuan bagi mengurangkan kecacatan jasad anum proses pengacuan suntikan logam (MIM)

by Jamaludin, Khairur Rijal, Muhamad, Norhamidi, Ab. Rahman, Mohd. Nizam, M. Amin, Sri Yulis, Murtadhahadi, Ibrahim
Published 2008

Rheological Investigation Of Stainless Steel Powder In Bimodal Particle Size Distribution

by Jamaludin, Khairur Rijal, Muhamad, Norhamidi, M. Amin, Sri Yulis, Ab. Rahman, Mohd Nizam, Murtadhahadi, Ibrahim
Published 2006

Injection molding parameter optimization using the Taguchi method for highest green strength for bimodal powder mixture with SS316L in PEG and PMMA

by Jamaludina, K. R., Muhamad, N., Ab. Rahman, M. N., Amin, S. Y. M., Murtadhahadi, I, Ismail, M. H.
Published 2008

Particle size and injection temperature effect on the injection molding of SS316l powder

by Jamaludin, Khairur Rijal, Muhamad, Norhamidi, Ab. Rahman, Mohd Nizam, M. Amin, Sri Yulis, Ismail, Muhammad Hussain, Ibrahim, Murtadhahadi
Published 2008

Pengoptimuman parameter pengacuan bagi mengurangkan kecacatan jasad anum proses pengacuan suntikan logam (MIM)

by Khairur Rijal, Jamaludin, Norhamidi, Muhamad, Assoc. Prof., Mohd. Nizam, Ab. Rahman, Dr., Sri Yulis, M. Amin, Murtadhahadi, Ir.
Published 2011