Computational fluid dynamics investigation on the use of heat shields for thermal management in a car underhood

by S. Y., Lam, Norshah Hafeez, Shuaib, Hasril, Hasini, Norshah Afizi, Shuaib
Published 2016

Occupational Safety and Health Leadership and Performance in Malaysian Industries

by Suhaila Abdul Hamid , A. M Leman, Norlia Goolamally, Norshah Afizi Shuaib
Published 2020

Strength of the weld line and warpage defects on the molded parts in injection molding process

by S. M., Nasir, Khairul Azwan, Ismail, Dr., Shayfull Zamree, Abd Rahim, Norshah Afizi, Shuaib
Published 2014

Applications of HIRARC at UniMAP Laboratories

by Norshah Afizi, Shuaib, Mohd. Fathullah, Ghazli @ Ghazali, Mohd. Asyraf, Che Doi, Azmi, Harun
Published 2014

Improvement of corrosion resistance of AZ91D magnesium alloy by lanthanum-based conversion coating

by Mohd Zamzuri, Mohammad Zain, Mokhtar, Mat Salleh, Norshah Afizi, Shuaib, S., Norbahiyah, Mohd Sabri, Hussin
Published 2011

Formation and effect of lanthanum based-anodic coating on corrosion resistance of AZ31 magnesium alloy

by Mohd Zahiruddin, Md. Zain, Takenake, Toshihide, Norshah Afizi, Shuaib, Mokhtar, Mat Saleh, Azmi, Harun
Published 2011

Comparison between single and multi gates for minimization of warpage using taguchi method in injection molding process for ABS material

by Mohd. Nasir, Mat Saad, Khairul Azwan, Ismail, Shayfull Zamree, Abd Rahim, Norshah Afizi, Shuaib
Published 2014

Sejarah dan Apresiasi: Seni Lukis dan Senireka

by Badrul Azmi, Abdul Holed, Mohd Effendi, Muhammad Suandi, Muhammad Farizuan, Rosli, Norshah Afizi, Shuaib
Published 2017

A study on two plate and three plate mold of ultra thin plates in minimizing warpage issue

by Mohd. Fathullah, Ghazli @ Ghazali, Shayfull Zamree, Abd. Rahim, Sharif, S., Norshah Afizi, Shuaib, Mohd. Nasir, Mat Saad
Published 2016

Optimization on parameter settings in determining warpage factors of a side-gated thin shallow part injection molding for PP, ABS & PC+ABS materials

by Norshah Afizi, Shuaib, Muhamad Nasir, Murad, Mohd. Fathullah, Ghazli @ Ghazali, Shayfull Zamree, Abd Rahim, Muhammad Syahril, Bahari
Published 2014

Warpage optimization on ultra thin plate in three plate mold for PP, ABS & ABS+PC materials by using Taguchi method

by Mohd. Nasir, Mat Saad, Norshah Afizi, Shuaib, Shayfull Zamree, Abd. Rahim, Mohd. Fathullah, Ghazli @ Ghazali, Nooraizedfiza, Zainon
Published 2013

Fire alarm system, portable fire extinguisher and hose real system maintenances for safety purpose and requirements

by Azmi, Harun, Norshah Afizi, Shuaib, Mohd. Fathullah, Ghazli @ Ghazali, Shayfull Zamree, Abd Rahim, M.Z.M., Zain
Published 2014

An approach to mechanization and automation of manual construction activity

by Mohamad Ezral, Baharudin, Shayfull Zamree, Abd Rahim, Mohd. Fathullah, Ghazli @ Ghazali, Norshah Afizi, Shuaib, Zaidi, Mohd Ripin
Published 2016

Optimization of tile laying process parameters using taguchi's method

by Norshah Afizi, Shuaib, Shayfull, Zamree Abd Rahim, Mohd. Fathullah, Ghazli @ Ghazali, Mohamad Ezral, Baharudin, Zaidi, Mohd Ripin
Published 2016

Inovasi Produk Tip & Panduan

by Shayfull Zamree, Abd. Rahim, Mohd. Fathullah, Ghazli @ Ghazali, Mohd Nasir, Mat Saad, Mohd Sabri, Hussin, Norshah Afizi, Shuaib
Published 2017

Warpage analyses on thin plate in three-plate mold by Taguchi method and analysis of variance (ANOVA) for PC, ABS and PC/ABS

by Shayfull Zamree, Abd Rahim, Mohd. Fathullah, Ghazli @ Ghazali, S. M., Nasir, Norshah Afizi, Shuaib, Muhamad Saifuldin, Abdul Manan, Dr.
Published 2014

Application of IDEF3 process description capture to mechanize manual tile installation

by Mohamad Ezral, Baharudin, Mohd. Fathullah, Ghazli @ Ghazali, Norshah Afizi, Shuaib, Shayfull Zamree, Abd Rahim, Dr., Zaidi, Mohd Ripin
Published 2016

The influence of different mold temperature on warpage in a thin shallow injection molding process

by Norshah Afizi, Shuaib, Muhamad Nasir, Murad, Mohd. Fathullah, Ghazli @ Ghazali, Shayfull Zamree, Abd Rahim, Muhamad Saifuldin, Abdul Manan, Dr.
Published 2014

Warpage analysis between straight and conformal cooling channels on thin shallow shell

by Norshah Afizi, Shuaib, Mohd. Fathullah, Ghazli @ Ghazali, Shayfull Zamree, Abd Rahim, Muhamad Nasir, Murad, Mohd Fidzwan, Md Amin Hamzas
Published 2014

Optimal process conditions of warpage with thin-shallow features molded with pin-point gating system

by Mohd Fathullah, Ghazli@Ghazali, Shayfull Zamree, Abd Rahim, Norshah Afizi, Shuaib, Mohd Nasir, Mat Saad, Muhamad Saifuldin, Abdul Manan
Published 2016