Contribution of processing parameters on void content in the vacuum bagging configurations of L-shaped composite laminates

by Hassan, M.H., Othman, A.R.
Published 2017

Specific bearing strength of bolted composite joint with different glass fiber reinforcement

by Othman, A.R., Jadee, K.J.
Published 2016

Specific bearing strength of bolted composite joint with different glass fiber reinforcement

by Othman, A.R., Jadee, K.J.
Published 2016

The use of response surface methodology (RSM) to optimize the acid digestion parameters in fiber volume fraction test of aircraft composite structures

by Hassan, M.H., Othman, A.R., Kamaruddin, S.
Published 2017

Design of 0.92 Ghz artificial magnetic conductor for metal object detection in RFID tag application with little sensitivity to incidence of angle

by Abu, Maisarah, Hussin, Eryana Eiyda, Othman , A.R
Published 2014

Performance Evaluation of Multiple Differential Detection for Third Generation Mobile Communication System

by Johal, M. S., Othman, A. R., Suaidi, M. K.
Published 2007

Damage Characterization of Polypropylene Honeycomb Sandwich Panels Subjected to Low-Velocity Impact

by A. Amir, Freeda, Othman, A. R., Md. Akil, H.
Published 2013

Design of a Compact X-Band Substrate Integrated Waveguide Directional Coupler

by Ahmad , B. H., Sabri , Siti Sabariah, Othman , A. R.
Published 2013

Mitigating stress concentration through defense hole system for improvement in bearing strength of composite bolted joint, Part 1: Numerical analysis

by Othman, A.R., Jadee, K.J., Ismadi, M.-Z.
Published 2017

A Low-Loss Coaxial Cavity Microwave Bandpass Filter with Post-Manufacturing Tuning Capabilities

by Zakaria, Z, Jawad, M. S, Othman, A. R, Gannapathy, V. R
Published 2013

Wear Detection of Drill Bit by Image-based Technique

by Sukeri, M., Paiz Ismadi, M.Z., Othman, A.R., Kamaruddin, S.
Published 2018

Limitations on the computational analysis of creep failure models: A review

by Sattar, M., Othman, A.R., Kamaruddin, S., Akhtar, M., Khan, R.
Published 2022

Limitations on the computational analysis of creep failure models: A review

by Sattar, M., Othman, A.R., Kamaruddin, S., Akhtar, M., Khan, R.
Published 2022

High Gain of Cascode LNA at 5.8GHz Using T-Matching Network for wireless Applications

by Ibrahim , A.B, Othman , A.R, Husain, M.N, Johal , M.S
Published 2011

Simulation of Single Stage Cascode Low Noise Amplifier at 5.8GHz Using T-Matching Network

by Ibrahim , A.B, Othman, A.R, Husain , M.N, Johal, M.S
Published 2011

Low Noise Amplifier at 5.8GHz with Cascode and Cascaded Techniques Using T-Matching Network for Wireless Applications

by Ibrahim , A.B, Othman , A.R, Hussain , M.N, Johal , M.S
Published 2011

Design Simulation of Multiple Differential Transceiver at 2.0 GHz for Third Generation Mobile Communication System

by Johal, M. S., Othman,, A. R., Suaidi, M. K., Mohd. Dom, H.
Published 2008

Design of LNA at 5.8GHz with Cascode and Cascaded Techniques Using T-Matching Network for WiMAX Applications

by Ibrahim, A.B, Othman , A.R, Hussain , M.N, Johal , M.S
Published 2011

Low Noise Amplifier at 5.8GHz with Cascode and Cascaded Techniques Using T-Matching Network for Wireless Applications

by Ibrahim, A.B, Othman, A.R, Hussain , M.N, Johal, M.S
Published 2011

The Cascode and Cascaded Techniques LNA at 5.8GHz Using T-Matching Network for WiMAX Applications

by Ibrahim, A.B, Othman, A.R, Husain, M.N, Johal, M.S
Published 2012