Quantifying Mechanical Properties Of Material Extrusion Fabricated Lattice Structures Based On Semi-rigid Joint Frame Formulation

by Park, Sang-In, Rosen, David W.
Published 2016

Effect Of Inert Gas Flow Velocity And Unidirectional Scanning On The Formation And Accumulation Of Spattered Powder During Selective Laser Melting

by Ahmad Bin Anwar, Pham, Quang-cuong
Published 2016

Understanding The Link Between Process Parameters, Microstructure And Mechanical Properties Of Laser Sintered Pa12 Parts Through X-ray Computed Tomography

by Kruth, Jean-pierre, Dewulf, Wim, Pavan, Michele, Craeghs, Tom, Puyvelde, Peter Van
Published 2016

Cross entropy weight minimization of a compressive strut

by Micu, L. Alexandru, Obrien, Eugene J., Malekjafarian, Abdollah
Published 2016

Potentials And Challenges In 3D Concrete Printing

by Wolfs, R. J. M., Salet, T. A. M.
Published 2016

Preliminary study on solvent effect in fiber fabrication in near-field electrospinning

by Pisut Koomsap, Sudipta Bain
Published 2016

The Preparation Of Calcia-based Ceramic Slurry For Rapid Manufacturing Hollow Turbine Blade Based On Stereolithography

by Yang, Qiang, Lu, Zhongliang, Huang, Fuxiang, Li, Dichen
Published 2016

Emerging Trends In Reverse Engineering

by Bidanda, Bopaya, Geng, Zhaohui
Published 2016

Haptic - A New Additive Manufacturing Technology For Footwear, Apparel And Accessories Applications

by Schmidt, Thomas W., Fang, Victor Zhijian
Published 2016

Rapid Tooling For Powder Injection Moulding Process

by Muhammad Aslam, Khurram Altaf, Ahmad Majdi Abdul Rani, Faiz Ahmad
Published 2016

Synthesis Of A Conductive Polymer For Potential Use In Printing Prosthetic Hands Using FDM Technique

by Zhong, Shaohong, Chor, Cheryl Yan Ting, Tan, Guoxian, Lin, Helen Jia Qi
Published 2016

Adaptive layer height during DLP materials processing

by Nielsen, Jakob Skov, Pederson, David Blue, Zhang, Yang, Hansen, Hans NØrgaard
Published 2016

The Manufacturing Of Cu-Al2O3 Composite Products: Study Of Process Parameters, Structure And Mechanical Properties

by Sergei, Sapozhnikov, Pavel, Lykov, Rustam, Baitimerov, Dmitrii, Zherebtcov, Ruslan, Abdrakhimov, Aleksandr, Akmedianov
Published 2016

Unified Storage File Format for Additive Manufacturing

by Roller, Dieter, Baumann, Felix, Eichhoff, Julian
Published 2016

Effect Of Alumina-based Fiber On The Mid-temperature Strength Of Integral Ceramic Mold For Casting Hollow Turbine Blade

by Tian, Guoqiang, Li, Dichen, Lu, Zhongliang, Wan, Weijian, Miao, Kai
Published 2016

The Influence of Preheating on Laser Beam Melting

by Berger, Uwe, Merkel, Markus, Liebisch, Andreas
Published 2016

A self-peeling vat for improved release capabilities during DLP materials processing

by Pedersen, David Bue, Zhang, Yang, Nielsen, Jakob Skov, Hansen, Hans NØrgaard
Published 2016

Quantifying mechanical properties of material extrusion fabricated lattice structures based on semi-rigid joint frame formulation

by Park, Sang-In, Rosen, David W.
Published 2016

Producing Hip Implants Of Titanium Alloys By Additive Manufacturing

by Evgenii, Borisov, Anatoliy, Popovich, Vadim, Sufiiarov, Igor, Polozov, Dmitriy, Masaylo
Published 2016

A strategy to locally optimize the material composition of AM construction elements

by Craveiro, F., Ba'rtolo, H., Duarte, J. P., Ba'rtolo, P. J.
Published 2016