Cold flow analysis on internal combustion engine with different piston bowl configurations

by Shafie, N. A. Mohamad, Said, M. F. Muhamad
Published 2017

Simulation of intake and exhaust valve timing on internal combustion engine

by Dahlan, A. A., Shahrafi, M., Muhamad Said, M. F.
Published 2017

Improved performance, combustion and emissions of SI engine fuelled with butanol: A review

by Veza, I., Said, M. F. M., Latiff, Z. A.
Published 2020

Effects of injection parameters and intake air temperature on acetone-butanol-ethanol (ABE) blend HCCI-DI engine

by Roslan, M.F., Veza, I., Said, M.F.M.
Published 2023

Comparative analysis of different engine operating parameters for on-board fuel octane number classification

by Ghanaati, A., Muhamad Said, M. F., Darus, I. Z. M.
Published 2017

Effects of asymmetric intake valve lift configuration towards in-cylinder air flow behavior

by Sabrudin, M. A. S., Said, M. F. M., Latiff, Z. A.
Published 2017

Optimization of biodiesel production using a stirred packed-bed reactor

by Ani, F. N., Said, N. H., Said, M. F. M.
Published 2018

Emission and performance characteristics of waste cooking oil biodiesel blends in a single direct injection diesel engine

by Said, N. H., Ani, F. N., Said, M. F. M.
Published 2018

Discharge and flow coefficient analysis in internal combustion engine using computational fluid dynamics simulation

by Mohamad Shafie, N. A., Muhamad Said, M. F., Abdul Latiff, Z., Rajoo, S.
Published 2017

Potential of range extender electric vehicles (REEVS)

by Veza, I., Roslan, M. F., Said, M. F. M., Latiff, Z. A.
Published 2020

Simulation of fuel economy for Malaysian urban driving

by Abas, M. A., Muhamad Said, M. F., Zainal Abidin, S. F., Zahari, I.
Published 2015

Controlled Auto-Ignition (CAI) combustion in a two-stroke cycle engine using hot burned gases

by Abdul Aziz, Azhar, Andwar, Amin Mahmoudzadeh, Muhamad Said, M.F., Abdul Latiff, Z.
Published 2013

A converted two-stroke cycle engine for compression ignition combustion

by Andwari, Amin Mahmoudzadeh, Abdul Aziz, Azhar, Muhamad Said, M. F., Abdul Latiff, Zulkanain
Published 2013

Simulation of fuel economy for Malaysian urban driving

by Abas, Mohd. Azman, Muhamad Said, M. F., Zainal Abidin, Shaiful Fadzil, Zahari, Izzarief
Published 2015

Effect of COVID-19 on biodiesel industry: A case study in Indonesia and Malaysia

by Veza, I., Muhammad, V., Oktavian, R., Djamari, D. W., Said, M. F. M.
Published 2021

Retrofitting of auxiliary components to enhance the performance of a single-cylinder, air-cooled gasoline two-stroke engine

by Abdul Aziz, Azhar, A. Latiff, Z., M. Ali, M. F., M. Said , M. F.
Published 2006

Cost-benefit analysis and emission reduction of lighting retrofits in residential sector

by Mahlia, T.M.I., Said, M.F.M., Masjuki, H.H., Tamjis, M.R.
Published 2017

Air flow distribution measurement of the vehicle cooling system test rig

by Lee, J. H., Latiff, Z. A., Perang, M. R. M., Said, M. F. M.
Published 2019

The study of the effect of intake valve timing on engine using cylinder deactivation technique via simulation

by Zainal Abidin, S. F., Muhamad Said, M. F., Abdul Latiff, Z., Zahari, I., Said, M.
Published 2015

Simulation analysis of spark ignition engine intake manifold for better performance

by Khairuddin, M. H., Bahri, M. F. S., Dahlan, A. A., Mohammad, M., Muhamad Said, M. F.
Published 2017