The influence of particle sizes and compaction pressure on surface hardness of aluminum composite fabricated via powder metallurgy

by Shamsul, Baharin Jamaludin, Prof. Dr., Zamri, Yusoff
Published 2014

The effects of superheating treatment on distribution of eutectic silicon particles in A357-continuous stainless steel composite

by Mazlee, Mohd Noor, Shamsul Baharin, Jamaludin, Prof. Dr.
Published 2013

The effect of sintering on the properties of powder metallurgy (PM) F-75 alloy

by Zuraidawani, Che Daud, Shamsul Baharin,  Jamaludin, Prof. Dr.
Published 2014

Interfacial reaction layer and tensile shear strength of AI 6063 alloy/stainless steel 316L spot welded joint

by Mazlee, Mohd Noor, Shamsul Baharin, Jamaludin, Prof. Dr., Ayusnida, S.
Published 2011

An examination of the evidence of abrasive wear in the wearing process of aluminium reinforced with slag particles using SEM

by Zamri, Yusoff, Shamsul Baharin, Jamaludin, Prof. Dr., Misbahul, Amin
Published 2012

Correlation and contribution of synergic factors on abrasive wear behaviour of slag/aluminium composite using statistical analysis

by Zamri, Yusoff, Shamsul Baharin, Jamaludin, Prof. Dr., Misbahul Amin
Published 2010

Recycled Aluminium Composite Pulley

by Mazlee, Mohd. Noor, Shamsul Baharin, Jamaludin, Prof. Dr., Murizam, Darus
Published 2010

Tribology and wear theory of aluminium composites: Review and discussion

by Zamri, Yusoff, Shamsul Baharin, Jamaludin, Prof. Dr., Mohammed Misbahul, Amin
Published 2012

Development of coconut fiber with the addition of fly ash for cement panel application in construction

by Alida, Abdullah, Shamsul Baharin, Jamaludin, Prof. Dr., Mazlee, Mohd Noor
Published 2012

Microstructure of aluminium-magnesium trisilicate (M-T-S) and aluminium zinc oxide (ZnO) composite by using powder metallurgy method

by Nurul Razliana, Abdul Razak, Suryadiansyah, Shamsul Baharin, Jamaludin, Prof. Dr.
Published 2012

Debinding study of injection molded CoCrMo alloy powder using palm based binder system

by Noorsyakirah, Abdulah, Shamsul Baharin, Jamaludin, Prof. Dr., Mohd Afian, Omar
Published 2012

Recycled Aluminium Composite Pulley

by Mazlee, Mohd. Noor, Shamsul Baharin, Jamaludin, Prof. Dr., Murizam, Darus
Published 2010

Effect of beta tricalcium phosphate (β-TCP) on properties of Mg-Zn composites

by Siti Aisyah, Buyong, Shamsul Baharin, Jamaludin, Prof. Dr., Rohaya, Abdul Malek
Published 2014

Microstructure study on functionally graded HAP-F75 fabricated by powder metallurgy

by Noorazimah, A., Shamsul Baharin, Jamaludin, Prof. Dr., Nur Hidayah, Ahmad Zaidi
Published 2011

Corrosion behaviour of Co-Cr-Mo alloys fabricated by powder metallurgy route

by Zuraidawani, Che Daud, Shamsul Baharin, Jamaludin, Prof. Dr., Mohd Fazlul, Bari
Published 2011

Fabrication of functionally graded materials from Hydroxyapatite and F75 Cobalt alloy

by Noorazimah, A., Nur Hidayah, Ahmad Zaidi, Shamsul Baharin, Jamaludin, Prof. Dr.
Published 2010

Characterization of Co-Cr-Mo (F-75) alloy produced by solid state sintering

by Zuraidawani, Che Daud, Shamsul Baharin, Jamaludin, Prof. Dr., Fazlul, Bari, Dr.
Published 2010

Effect of heating rate on microstructure and properties of the iron-chromium reinforced with alumina particle produced via microwave sintering

by Shamsul, Baharin Jamaludin, Prof. Dr., Mazlee, Mohd Noor, Dr., Rahman, W
Published 2014

Sand replacement materials (SRM) in sustainable cement composites; A concise review

by Madzura, Mohamad, Mazlee, Mohd Noor, Dr., Shamsul Baharin,  Jamaludin, Prof. Dr.
Published 2014

Compressive and wear resistance of alumina reinforced fe-cr matrix composites

by Saidatulakmar, Shamsuddin, Shamsul Baharin, Jamaludin, Prof. Dr., Zuhailawati, Hussain, Zainal Arifin, Ahmad
Published 2014