STUDY ON THE EFFECT OF STAGE I TEMPERATURE VARIATIONS BETWEEN 660°C-700°C ON TWO-STEPS HEAT TREATMENT OF MANGANESE STEEL G-X120MN12
The metallic material of manganese steel is generally used for component applications which require a high enough abrasive wear resistance because this type of steel has the ability to undergo a martensitic transformation when its surface is subjected to plastic deformation. In the actual applica...
Saved in:
| 主要作者: | |
|---|---|
| 格式: | Final Project |
| 語言: | Indonesia |
| 在線閱讀: | https://digilib.itb.ac.id/gdl/view/39598 |
| 標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
| 總結: | The metallic material of manganese steel is generally used for component
applications which require a high enough abrasive wear resistance because this type of
steel has the ability to undergo a martensitic transformation when its surface is subjected
to plastic deformation. In the actual application, the G-X120Mn12 manganese steel must
be treated first due to the condition of the as-cast, this material is still hard but brittle. A
heat treatment method known as the two-stage heat treatment is usually carried out to
handle this problem. To better understand the mechanism of phase transformation and
the effect of temperature on the results of the microstructure of this material, in this
study, the authors carried out an experiment of this two-stage heat treatment carried out
with a variation of stage one temperature of 660°C, 680°C, and 700°C. From the result of
this experiment, it can be concluded that the value of the stage one temperature can
affect the microstructure related with the value of pearlite phase fraction and the area of
fine carbide formed after the two stage heat treatment and it also affects the hardness
value of G-X120Mn12 manganese steel.
|
|---|