STUDI KELAYAKAN, PERENCANAAN, DETAIL DESAIN DAN DESAIN SISTEM MODEL PLTMH PADA BAK PELEPAS TEKAN (BPT) PDAM KABUPATEN GUNUNGKIDUL
Gunungkidul is mountainous and drought-prone areas. These conditions cause some areas had difficulties of water supply . As the main body needs to perform metabolism and maintain a healthy body the water intake must be sufficient. PDAM as the water service provider for the community requires a techn...
Saved in:
| Main Authors: | , |
|---|---|
| Format: | Theses and Dissertations NonPeerReviewed |
| Published: |
[Yogyakarta] : Universitas Gadjah Mada
2014
|
| Subjects: | |
| Online Access: | https://repository.ugm.ac.id/128449/ http://etd.ugm.ac.id/index.php?mod=penelitian_detail&sub=PenelitianDetail&act=view&typ=html&buku_id=68794 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Universitas Gadjah Mada |
| Summary: | Gunungkidul is mountainous and drought-prone areas. These conditions
cause some areas had difficulties of water supply . As the main body needs to
perform metabolism and maintain a healthy body the water intake must be
sufficient.
PDAM as the water service provider for the community requires a
technology that can produce energy, so that the water from low-lying areas can
be lifted to higher areas. In the development of Micro Hydro Power Electric
(Pembangkit Listrik Tenaga Mikro Hidro /PLTMH ) is not only meet the
needs of electrical and lighting. The system can be part of a clean water
system supplier for the community.
This study was aimed to conduct a feasibility study, planning, design and
manufacturing of installation system of laboratory testing. The results of this
study are expected to produce method as an effort to raise water from the lower
to the higher area.
The study started with the collection of secondary data and primary data
through surveys, discharge (Q) measurements, the potential Head (H)
measurements, Feasibility Study, planning, turbine design manufacturing and
civil buildings design.
Turbines used in the study was cross flow turbine with blade number of
24 pieces, in earlier tests with the Head of 2.9 m produces the characteristics of
Q = 40 Vs, Pout = 593.94 watts , N = 1273 rpm and rl = 96 % .
Testing laboratory model system using the penstock installation of 4
inches PVC pipe, and Head of 4 m , with a working pump system or Pump As
Turbine ( PAT ), resulted in the characteristics of Q in = 20 1/s , N turbine of
646 rpm and rl = 98.9% and was able to lift water up to 7.5 m. |
|---|