Development of short cut design method for CO removal system
Hydrogen-rich reformate produced by reforming primary fuels in the fuel processor system, contains significant amount of CO, which is the main culprit for the performance reduction in Proton Electrolyte Membrane Fuel Cell (PEMFC) performance by CO poisoning on the Platinum catalyst at anode. Thus th...
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
2007
|
| Online Access: | http://journalarticle.ukm.my/1469/1/2007-Article_6_K-19.pdf http://journalarticle.ukm.my/1469/ http://www.ukm.my/jkukm/index.php/jkukm |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Universiti Kebangsaan Malaysia |
| Language: | English |
| Summary: | Hydrogen-rich reformate produced by reforming primary fuels in the fuel processor system, contains significant amount of CO, which is the main culprit for the performance reduction in Proton Electrolyte Membrane Fuel Cell (PEMFC) performance by CO poisoning on the Platinum catalyst at anode. Thus the reformate from the fuel processor system must be purified by removing CO before being used in the PEMFC stack. The objective of the present study is to design conceptually a CO removal system consisting of a mesoporous tubular ceramic membrane (TCM) and a pressure swing adsorber (PSA) in series. The first section of the present study describes the design of the TCM and the second section describes the design of the PSA. The designs for both units are based on new shortcut design methods developed by the authors. The effect of some important parameters such as the temperature, pressure and membrane area on the degree of separation is investigated. It is found that theoretically, the TCM-PSA system capable of reducing the CO concentration from 2000ppm to less than 10ppm |
|---|