Tribology Investigation of Automotive Air Condition (AAC) compressor by using Al2O3/PAG Nanolubricant / A.R.M. Aminullah...[et al.]

• Main Authors: A.R.M., Aminullah, W.H., Azmi, A.A.M., Redhwan, M.Z., Sharif, N.N.M., Zawawi, K., Kadirgama, M.N.S., Ashraf
• Format: Article
• Language: English
• Published: Faculty of Mechanical Engineering Universiti Teknologi MARA (UiTM) 2018
• Subjects: TJ Mechanical engineering and machinery
• Online Access: http://ir.uitm.edu.my/id/eprint/36284/1/36284.pdf; http://ir.uitm.edu.my/id/eprint/36284/; https://jmeche.uitm.edu.my/
• Institution: Universiti Teknologi Mara

Lubrication is a requisite for any mechanical equipment that moved to avoid wear of sliding parts and enhance the equipment operation consistency. The objective of this study was to seek a new improved automotive air conditioning (AAC) compressor lubricant to enhanced AAC performances. The type of compressor is piston type, Sanden SD 7H10,that normally used by Malaysia compact car. The tribological investigation was focusing on Coefficient of friction and wear rate. The wear rate and coefficient of friction (COF) of Alumina/Polyalkylene glycol (Al2O3/PAG) nanolubricant were evaluated employing reciprocating test conditions to replicate a piston ring/cylinder liner contact following the ASTM G 181-11 Standard. Al2O3 nanoparticle was dispersed in PAG lubricant for volume concentrations between 0.006 to 0.014 vol %. Al2O3/PAG nanolubricant with 0.010 % vol. concentration showed the best reduction of frictional power loss. The enhancement of power saving due to frictional losses was up to 7.59 % compared to pure PAG lubricant. Furthermore, the wear rate of piston liner A.R.M. Aminullah et. al. reduced by 33.39 %. Al2O3 nanoparticles in this circumstances, performed as a solid lubricant to reduce wear. These results show potential approach to enhance the AAC performance, save automotive fuel and elongated the life span for AAC compressor.