Evaluation of stress distributions of calcium silicate-based root canal sealer in bulk or with main core material: A finite element analysis study

• Main Authors: Smran, Ahlam, Abdullah, Mariam, Ahmad, Norasmatul Akma, ben Yahia, Faycal, Fouda, Ahmed Mahmoud, Alturaiki, Sami, AL-Maflehi, Nassr, Samran, Abdulaziz
• Format: Article
• Published: Public Library of Science 2024
• Subjects: RK Dentistry
• Online Access: http://eprints.um.edu.my/45442/; https://doi.org/10.1371/journal.pone.0299552
• Institution: Universiti Malaya

This research aimed to assess the stress distribution in lower premolars that were obturated with BioRoot RCS or AH Plus, with or without gutta percha (GP), and subjected to vertical and oblique forces. One 3D geometric model of a mandibular second premolar was created using SolidWorks software. Eight different scenarios representing different root canal filling techniques, single cone technique with GP and bulk technique with sealer only with occlusal load directions were simulated as follows: Model 1 (BioRoot RCS sealer and GP under vertical load VL]), Model 2 (BioRoot RCS sealer and GP under oblique load OL]), Model 3 (AH Plus sealer with GP under VL), Model 4 (AH Plus sealer with GP under OL), Model 5 (BioRoot RCS sealer in bulk under VL), Model 6 (BioRoot RCS in bulk under OL), Model 7 (AH Plus sealer in bulk under VL), and Model 8 (AH Plus sealer in bulk under OL). A static load of 200 N was applied at three occlusal contact points, with a 45 degrees angle from lingual to buccal. The von Mises stresses in root dentin were higher in cases where AH Plus was used compared to BioRoot RCS. Furthermore, shifting the load to an oblique direction resulted in increased stress levels. Replacing GP with sealer material had no effect on the dentin maximum von Mises stress in BioRoot RCS cases. Presence of a core material resulted in lower stress in dentin for AH Plus cases, however, it did not affect the stress levels in dentin for cases filled with BioRoot RCS. Stress distribution in the dentin under oblique direction was higher regardless of sealer or technique used.