Characteristics of gellan gum-LiCF3SO3 polymer electrolytes

A new and thermally stable gellan-based polymer electrolytes (PEs) with LiCF3SO3 were prepared and characterized by spectroscopic (FTIR), thermal (TGA, DSC and DMA), structural (X-ray), electrochemical stability (CV. and LSV) and ionic conductivity measurements. The obtained results revealed that th...

全面介紹

Saved in:
書目詳細資料
Main Authors: Noor, I.S.M., Majid, Siti Rohana, Arof, Abdul Kariem, Djurado, D., Neto, S.C., Pawlicka, A.
格式: Article
出版: Elsevier 2012
主題:
在線閱讀:http://eprints.um.edu.my/7697/
https://doi.org/10.1016/j.ssi.2012.03.019
標簽: 添加標簽
沒有標簽, 成為第一個標記此記錄!
機構: Universiti Malaya
實物特徵
總結:A new and thermally stable gellan-based polymer electrolytes (PEs) with LiCF3SO3 were prepared and characterized by spectroscopic (FTIR), thermal (TGA, DSC and DMA), structural (X-ray), electrochemical stability (CV. and LSV) and ionic conductivity measurements. The obtained results revealed that the samples are semi-crystalline and are thermally stable up to 234 degrees C. The ionic conductivity measurements revealed that the ionic conductivity of the electrolyte varies with the salt concentration to reach the highest conductivity value of 5.4 x 10(-4) S/cm at room temperature for 40 wt.% of LiCF3SO3. For this compound, when the temperature is raised to 80 degrees C, the ionic conductivity increases to 6.6 x 10(-4) S/cm with an activation energy of 14.6 kJ/mol. Cyclic voltammetry measurements demonstrated that the plating-striping process in highest conducting.gellan-LiCF3SO3 sample occured at 0.55 V and 1.24 V respectively. All results obtained indicate that gellan-based PEs are very promising candidates to be used as electrolytes in Li conducting electrochemical devices. (C) 2012 Elsevier B.V. All rights reserved.