Temperature Analysis When Using Ethylene-Glycol-Based TiO2 as a New Coolant for Milling
This paper presents the effects of various milling conditions on the tool wear and workpiece temperature when using ethylene-glycol-based TiO2 nanofluid as the coolant for stainless steel AISI 304. A TiN coated carbide insert is used as the milling tool. A thermocouple was embedded into the workpiec...
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Universiti Malaysia Pahang
2015
|
| Subjects: | |
| Online Access: | http://umpir.ump.edu.my/id/eprint/11649/1/fkm-2015-Yogeswaran-temperature%20analysis.pdf http://umpir.ump.edu.my/id/eprint/11649/ http://dx.doi.org/10.15282/ijame.11.2015.10.0191 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Universiti Malaysia Pahang |
| Language: | English |
| Summary: | This paper presents the effects of various milling conditions on the tool wear and workpiece temperature when using ethylene-glycol-based TiO2 nanofluid as the coolant for stainless steel AISI 304. A TiN coated carbide insert is used as the milling tool. A thermocouple was embedded into the workpiece to record the workpiece temperature during the end-milling process. It can be clearly seen that the temperature keeps on increasing after each experimental pass for three sets of experiments. The experiment conducted using the ethylene-glycol-based TiO2 nanocoolant exhibits a much lower workpiece temperature compared to the experiment conducted using a normal commercial coolant. Milling with the ethylene-glycol-based TiO2 nanocoolant reduced the wear on the edge of the insert compared to the normal commercial coolant. In conclusion, end-milling stainless steel AISI 304 using a TiN coated carbide insert and an ethylene-glycol-based TiO2 nanocoolant exhibits superior results with regard to workpiece temperature and tool wear. The temperature was reduced by 30 percent when using the nanofluid.
|
|---|