Investigation of abundant treated sea sand (ATSS) with different percentages in concrete brick making ratio 1:3

This study is to investigate the Abundant Treated Sea Sand (ATSS) with different percentages as material replacing in concrete brick making ratio 1:3. The abundant means that it is supplies are more than sufficient. By relating to this study, the ATSS is same as normal sea sand but it was located...

Full description

Saved in:
Bibliographic Details
Main Author: Abdul Rahman, Othman
Format: Undergraduates Project Papers
Language:English
Published: 2010
Subjects:
Online Access:http://umpir.ump.edu.my/id/eprint/2377/1/ABDUL_RAHMAN_BIN_OTHMAN.PDF
http://umpir.ump.edu.my/id/eprint/2377/
Tags: Add Tag
No Tags, Be the first to tag this record!
Institution: Universiti Malaysia Pahang
Language: English
id my.ump.umpir.2377
record_format eprints
spelling my.ump.umpir.23772015-03-03T07:56:17Z http://umpir.ump.edu.my/id/eprint/2377/ Investigation of abundant treated sea sand (ATSS) with different percentages in concrete brick making ratio 1:3 Abdul Rahman, Othman TA Engineering (General). Civil engineering (General) This study is to investigate the Abundant Treated Sea Sand (ATSS) with different percentages as material replacing in concrete brick making ratio 1:3. The abundant means that it is supplies are more than sufficient. By relating to this study, the ATSS is same as normal sea sand but it was located far away from sea water exposure. The field of studies covers crucial parameters in determining the flexural and drying shrinkage. A total of 200 ATSS concrete bricks with dimensions of 225 mm in length, 105 mm in width, and 75 mm in depth were prepared and been divided into two group with an equal numbers according to different type of testing. Every of 100 ATSS concrete brick in each of the test had five different replacements of ATSS percentages. There were 20%, 15%, 10%, 5% and 0% as the control mixture. All the samples were only cured under water curing for 7 and 28 days before testing. The water to cement ratio of 0.40 and cement to aggregates ratio 1:3 were applied to all of the sample mixtures. In accordance to the drying shrinkage testing, the 10% ATSS mixture shows the highest drying shrinkage strain compared to other mixture at indoor condition while 0% ATSS mixture shows the greatest drying shrinkage strain reading than other mixture at outdoor condition. By according to the BS 6073, it requires 0.65 MJa as a minimum flexural strength for the building materials to be used in structural applications. The final result representated that the control sample did not achieved the minimum flexural strength and the ATSS mixtures also did not meet or exceed the flexural strength of control mixtures. The study finally demonstrated that the period of abundant sea sand treated must be extended due to get the lower chloride content. 2010-11 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/2377/1/ABDUL_RAHMAN_BIN_OTHMAN.PDF Abdul Rahman, Othman (2010) Investigation of abundant treated sea sand (ATSS) with different percentages in concrete brick making ratio 1:3. Faculty of Civil Engineering and Earth Resources, Universiti Malaysia Pahang.
institution Universiti Malaysia Pahang
building UMP Library
collection Institutional Repository
continent Asia
country Malaysia
content_provider Universiti Malaysia Pahang
content_source UMP Institutional Repository
url_provider http://umpir.ump.edu.my/
language English
topic TA Engineering (General). Civil engineering (General)
spellingShingle TA Engineering (General). Civil engineering (General)
Abdul Rahman, Othman
Investigation of abundant treated sea sand (ATSS) with different percentages in concrete brick making ratio 1:3
description This study is to investigate the Abundant Treated Sea Sand (ATSS) with different percentages as material replacing in concrete brick making ratio 1:3. The abundant means that it is supplies are more than sufficient. By relating to this study, the ATSS is same as normal sea sand but it was located far away from sea water exposure. The field of studies covers crucial parameters in determining the flexural and drying shrinkage. A total of 200 ATSS concrete bricks with dimensions of 225 mm in length, 105 mm in width, and 75 mm in depth were prepared and been divided into two group with an equal numbers according to different type of testing. Every of 100 ATSS concrete brick in each of the test had five different replacements of ATSS percentages. There were 20%, 15%, 10%, 5% and 0% as the control mixture. All the samples were only cured under water curing for 7 and 28 days before testing. The water to cement ratio of 0.40 and cement to aggregates ratio 1:3 were applied to all of the sample mixtures. In accordance to the drying shrinkage testing, the 10% ATSS mixture shows the highest drying shrinkage strain compared to other mixture at indoor condition while 0% ATSS mixture shows the greatest drying shrinkage strain reading than other mixture at outdoor condition. By according to the BS 6073, it requires 0.65 MJa as a minimum flexural strength for the building materials to be used in structural applications. The final result representated that the control sample did not achieved the minimum flexural strength and the ATSS mixtures also did not meet or exceed the flexural strength of control mixtures. The study finally demonstrated that the period of abundant sea sand treated must be extended due to get the lower chloride content.
format Undergraduates Project Papers
author Abdul Rahman, Othman
author_facet Abdul Rahman, Othman
author_sort Abdul Rahman, Othman
title Investigation of abundant treated sea sand (ATSS) with different percentages in concrete brick making ratio 1:3
title_short Investigation of abundant treated sea sand (ATSS) with different percentages in concrete brick making ratio 1:3
title_full Investigation of abundant treated sea sand (ATSS) with different percentages in concrete brick making ratio 1:3
title_fullStr Investigation of abundant treated sea sand (ATSS) with different percentages in concrete brick making ratio 1:3
title_full_unstemmed Investigation of abundant treated sea sand (ATSS) with different percentages in concrete brick making ratio 1:3
title_sort investigation of abundant treated sea sand (atss) with different percentages in concrete brick making ratio 1:3
publishDate 2010
url http://umpir.ump.edu.my/id/eprint/2377/1/ABDUL_RAHMAN_BIN_OTHMAN.PDF
http://umpir.ump.edu.my/id/eprint/2377/
_version_ 1643664604804415488