Dye sensitized solar cell based on polyethylene glycol/4,4’- Diphenylmethane diisocyanate copolymer quasi solid state electrolyte
In this study, quasi-solid state electrolyte (QSE) was prepared by blending the polyethylene glycol (PEG) with molecular weight of 400, 4,4’-diphenylmethane diisocyanate (MDI), potassium iodide (KI) and iodine (I2) under a low reaction temperature (50oC) for two hours. QSEs with a different ratio of...
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | Proceedings |
| Language: | English English |
| Published: |
Trans Tech Publications, Switzerland
2014
|
| Subjects: | |
| Online Access: | https://eprints.ums.edu.my/id/eprint/41292/1/ABSTRACT.pdf https://eprints.ums.edu.my/id/eprint/41292/2/FULL%20TEXT.pdf https://eprints.ums.edu.my/id/eprint/41292/ https://www.scientific.net/AMM.625.140 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Universiti Malaysia Sabah |
| Language: | English English |
| Summary: | In this study, quasi-solid state electrolyte (QSE) was prepared by blending the polyethylene glycol (PEG) with molecular weight of 400, 4,4’-diphenylmethane diisocyanate (MDI), potassium iodide (KI) and iodine (I2) under a low reaction temperature (50oC) for two hours. QSEs with a different ratio of PEG to MDI were formulated. Adding 15 vol% of MDl into the QSE was found to give the highest open circuit voltage, short circuit current and energy conversion efficient, which were 360 mV, 0.077 mA/cm2 and 0.02% respectively. |
|---|