Detection of a single rolling element bearings fault via relative shaft displacement measurement
Link to publisher's homepage at http://www.myiem.org.my/
Saved in:
Main Authors: | , |
---|---|
Format: | Article |
Language: | English |
Published: |
The Institution of Engineers, Malaysia
2011
|
Subjects: | |
Online Access: | http://dspace.unimap.edu.my/xmlui/handle/123456789/13550 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Institution: | Universiti Malaysia Perlis |
Language: | English |
id |
my.unimap-13550 |
---|---|
record_format |
dspace |
spelling |
my.unimap-135502011-08-12T06:42:19Z Detection of a single rolling element bearings fault via relative shaft displacement measurement Leo, Sing Lim Mohammad Shahril, Osman Rolling elements bearings Relative shaft displacement Bearing faults Link to publisher's homepage at http://www.myiem.org.my/ This paper describes with the investigation of using relative shaft displacement approach to detect early rolling element bearings fault. Rolling element bearings are among the most common elements used in the operation of rotating machines. However, they are one of the weak points in these machines where the majority of problems associated are caused by bearings failures. As a result, condition monitoring of the rolling element bearings is important in order to keep these machineries in their proper operating condition. Analysis and maintenance of any rolling element bearings failures are made much easier if any fault can be identified during its early stage. Thus, it is the aim of this research to investigate the relative shaft displacement technique for the early fault detection in rolling element bearings. Experiments were conducted on a rotor kit that simulates the actual behaviour of rotating machines. In order to simulate the early signs of fault developing, a single localized fault was induced on the outer race and the inner race for ball bearings and roller bearings, as well as on a rolling element of a roller bearing. Experimental data from the relative shaft displacement measurements due to dynamic vibrations of the shaft were analysed using time waveform analysis to detect the sudden changes in amplitude as a function of time. The experimental results show that fault signal is clearly present with positive or negative spikes, or both in the time waveform analysis depending on the type of fault that occurs and its location relative to the probe tip. Conversely, non-defective rolling element bearings exhibit a smooth time waveform curve. 2011-08-12T06:42:19Z 2011-08-12T06:42:19Z 2004-09 Article The Journal of the Institution of Engineers, Malaysia, vol. 65(3/4), 2004, pages 43-49 0126-513X http://myiem.org.my/content/iem_journal_2004-175.aspx http://hdl.handle.net/123456789/13550 en The Institution of Engineers, Malaysia |
institution |
Universiti Malaysia Perlis |
building |
UniMAP Library |
collection |
Institutional Repository |
continent |
Asia |
country |
Malaysia |
content_provider |
Universiti Malaysia Perlis |
content_source |
UniMAP Library Digital Repository |
url_provider |
http://dspace.unimap.edu.my/ |
language |
English |
topic |
Rolling elements bearings Relative shaft displacement Bearing faults |
spellingShingle |
Rolling elements bearings Relative shaft displacement Bearing faults Leo, Sing Lim Mohammad Shahril, Osman Detection of a single rolling element bearings fault via relative shaft displacement measurement |
description |
Link to publisher's homepage at http://www.myiem.org.my/ |
format |
Article |
author |
Leo, Sing Lim Mohammad Shahril, Osman |
author_facet |
Leo, Sing Lim Mohammad Shahril, Osman |
author_sort |
Leo, Sing Lim |
title |
Detection of a single rolling element bearings fault via relative shaft displacement measurement |
title_short |
Detection of a single rolling element bearings fault via relative shaft displacement measurement |
title_full |
Detection of a single rolling element bearings fault via relative shaft displacement measurement |
title_fullStr |
Detection of a single rolling element bearings fault via relative shaft displacement measurement |
title_full_unstemmed |
Detection of a single rolling element bearings fault via relative shaft displacement measurement |
title_sort |
detection of a single rolling element bearings fault via relative shaft displacement measurement |
publisher |
The Institution of Engineers, Malaysia |
publishDate |
2011 |
url |
http://dspace.unimap.edu.my/xmlui/handle/123456789/13550 |
_version_ |
1643790889891397632 |