Optimization of resistance spot welding process parameter on Galvanised steel by using Taguchi Method
Access is limited to UniMAP community.
Saved in:
| Main Author: | |
|---|---|
| Other Authors: | |
| Format: | Other |
| Language: | English |
| Published: |
Universiti Malaysia Perlis (UniMAP)
2022
|
| Subjects: | |
| Online Access: | http://dspace.unimap.edu.my:80/xmlui/handle/123456789/77368 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Universiti Malaysia Perlis |
| Language: | English |
| id |
my.unimap-77368 |
|---|---|
| record_format |
dspace |
| spelling |
my.unimap-773682022-12-05T01:22:31Z Optimization of resistance spot welding process parameter on Galvanised steel by using Taguchi Method Poorani, Jaraman Dr. Nur Farhana, Hayazi School of Materials Engineering Spot welding Galvanised steel Taguchi method Access is limited to UniMAP community. In this experimental study, three resistance spot welding parameters were varied on galvanized steel to determine the optimum value of parameters by using the Taguchi method of analysis. Selected parameters are welding current , welding time and holding time. All the three of these parameters consist of three levels. There are four steps in the Taguchi method of analysis, namely the selection of suitable Orthogonal Array (OA), calculation of S / N ratio, statistical analysis using ANOVA and Confirmation Test. The type of OA used in this study was L9.Tensile tests and hardness tests were conducted on the sample. Results from these tests were used to calculate the S / N ratio, ANOVA and Confirmation Test by using formulas. From this Taguchi method the optimal parameters value and percentage of contributions of factors to the welding can be identified in order to produce high quality weld joints. The results shows that the optimum value of parameters for tensile strength analysed by using Taguchi method are welding current of 5 kA, welding time of 10 seconds and holding time of 10 seconds and the optimum value of parameters for the hardness are welding current of 4 kA, welding time of 5 seconds and holding time of 5 seconds. 2022-08 2022-12-05T01:22:31Z 2022-12-05T01:22:31Z 2017-06 Other http://dspace.unimap.edu.my:80/xmlui/handle/123456789/77368 en Universiti Malaysia Perlis (UniMAP) |
| institution |
Universiti Malaysia Perlis |
| building |
UniMAP Library |
| collection |
Institutional Repository |
| continent |
Asia |
| country |
Malaysia |
| content_provider |
Universiti Malaysia Perlis |
| content_source |
UniMAP Library Digital Repository |
| url_provider |
http://dspace.unimap.edu.my/ |
| language |
English |
| topic |
Spot welding Galvanised steel Taguchi method |
| spellingShingle |
Spot welding Galvanised steel Taguchi method Poorani, Jaraman Optimization of resistance spot welding process parameter on Galvanised steel by using Taguchi Method |
| description |
Access is limited to UniMAP community. |
| author2 |
Dr. Nur Farhana, Hayazi |
| author_facet |
Dr. Nur Farhana, Hayazi Poorani, Jaraman |
| format |
Other |
| author |
Poorani, Jaraman |
| author_sort |
Poorani, Jaraman |
| title |
Optimization of resistance spot welding process parameter on Galvanised steel by using Taguchi Method |
| title_short |
Optimization of resistance spot welding process parameter on Galvanised steel by using Taguchi Method |
| title_full |
Optimization of resistance spot welding process parameter on Galvanised steel by using Taguchi Method |
| title_fullStr |
Optimization of resistance spot welding process parameter on Galvanised steel by using Taguchi Method |
| title_full_unstemmed |
Optimization of resistance spot welding process parameter on Galvanised steel by using Taguchi Method |
| title_sort |
optimization of resistance spot welding process parameter on galvanised steel by using taguchi method |
| publisher |
Universiti Malaysia Perlis (UniMAP) |
| publishDate |
2022 |
| url |
http://dspace.unimap.edu.my:80/xmlui/handle/123456789/77368 |
| _version_ |
1753972996213571584 |