Hydraulic Analysis of Micro-irrigation Laterals: a New Approach
The current approach in hydraulic analysis of micro-irrigation laterals has been derived from sprinkler irrigation design where pipe sizes and flow rates are large. The approach assumes uniform emitter discharge and emitter barb head loss, or uses empirical formula which are not applicable to micr...
Saved in:
| Main Authors: | , |
|---|---|
| 格式: | Article |
| 語言: | English English |
| 出版: |
Universiti Putra Malaysia Press
1994
|
| 在線閱讀: | http://psasir.upm.edu.my/id/eprint/3131/1/Hydraulic_Analysis_of_Micro-irrigation_Laterals.pdf http://psasir.upm.edu.my/id/eprint/3131/ |
| 標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
| 總結: | The current approach in hydraulic analysis of micro-irrigation laterals has been
derived from sprinkler irrigation design where pipe sizes and flow rates are large.
The approach assumes uniform emitter discharge and emitter barb head loss, or uses empirical formula which are not applicable to micro-irrigation systems due
to errors caused by ignoring the effect of water temperature. The formula do not fit the actual head loss in small diameter polyethylene pipes for the range of
Reynolds number normally encountered in micro-irrigation and should not be
used for accurate analysis. The Darcy-Weisbach equation with a combined friction
factor for the smooth pipe and local loss due to emitter connection used in a step
by step evaluation of head loss gives more accurate results than the current
method. The new approach also considers emitter manufacturing variation, and
the effect of temperature changes on emitter discharge and lateral flow rates. This
approach makes the use of equivalent pipe length for emitter connection head loss
and a factor for dividing flow unnecessary. |
|---|