An automatic traffic cones dispenser and collector system
This project report is about to develop an automatic system for dispense and collect the traffic cones by using manipulator which is robot arm. The development of the robot arm which is five degree of freedom is the most important part in this project in order to make this system become an aut...
Saved in:
| Main Author: | |
|---|---|
| Format: | Thesis |
| Language: | English English English |
| Published: |
2014
|
| Subjects: | |
| Online Access: | http://eprints.uthm.edu.my/1683/1/24p%20SITI%20NOOR%20AISHAH%20MOHAMAD%20ARIFFIN.pdf http://eprints.uthm.edu.my/1683/2/SITI%20NOOR%20AISHAH%20MOHAMAD%20ARIFFIN%20COPYRIGHT%20DECLARATION.pdf http://eprints.uthm.edu.my/1683/3/SITI%20NOOR%20AISHAH%20MOHAMAD%20ARIFFIN%20WATERMARK.pdf http://eprints.uthm.edu.my/1683/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Universiti Tun Hussein Onn Malaysia |
| Language: | English English English |
| Summary: | This project report is about to develop an automatic system for dispense
and collect the traffic cones by using manipulator which is robot arm. The
development of the robot arm which is five degree of freedom is the most
important part in this project in order to make this system become an automatic
system. A microcontroller PIC18F46K22 is used as the brain part of the robot
arm and C programming had been used to programme the microcontroller. For
the five joint parts of the robot arm, three different types of motor had been used
which are cube servo, dc motor and servo motor to represent five degree of
freedom of the robot arm. The sensor that had been used in this project is
potentiometer which is used for measurement to measure the position needs for
this robot arm. The size of traffic cones used is reduced to the smaller size which
is compatible with the size of the robot arm in this project. |
|---|