A porous polyethersulfone hollow fiber membrane in a gas humidification process
A porous polyethersulfone hollow fiber membrane was fabricated via a dry-wet phase inversion process. The membrane was characterized by measuring the pore size, porosity and LEPw. Scanning electron microscopy (SEM) revealed the presence of finger-like macrovoids in the cross-section of the membrane,...
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | Article |
| Published: |
Royal Society of Chemistry
2015
|
| Subjects: | |
| Online Access: | http://eprints.utm.my/id/eprint/55804/ http://dx.doi.org/10.1039/c4ra14180f |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Universiti Teknologi Malaysia |
| Summary: | A porous polyethersulfone hollow fiber membrane was fabricated via a dry-wet phase inversion process. The membrane was characterized by measuring the pore size, porosity and LEPw. Scanning electron microscopy (SEM) revealed the presence of finger-like macrovoids in the cross-section of the membrane, which contributed to the reduction of tortuosity. The fabricated membrane was further applied in gas humidification. It was found that the water flux was increased by an increase in the gas and liquid flow rates and temperature but reduced by an increase in gas pressure. The water flux of the fabricated membrane exhibited a gas humidification performance superior to a commercial humidifier, e.g. it has 380% higher water flux than the Perma Pure®1 model PH-60T-24SS at Tliquid = 40 °C. |
|---|