Tensile strength polymer matrix composite with reinforcement gigantochloa apus

Composite is a combination of two or more materials, where one type materials is mixed into another type of materials. Combining several different phases will create a material with performance better than the earlier phase of the constituent. In this study, a composite consisting of a polymer matri...

Full description

Saved in:
Bibliographic Details
Main Authors: Djamil, Sofyan, Suhot, Mohamed Azlan, Hasan, Mohd. Zaki
Format: Conference or Workshop Item
Published: 2015
Subjects:
Online Access:http://eprints.utm.my/id/eprint/62183/
http://untar.ac.id/ft/2nd-international-conference-on-engineering-of-tarumanagara-2/?lang=en
Tags: Add Tag
No Tags, Be the first to tag this record!
Institution: Universiti Teknologi Malaysia
id my.utm.62183
record_format eprints
spelling my.utm.621832017-05-30T01:20:29Z http://eprints.utm.my/id/eprint/62183/ Tensile strength polymer matrix composite with reinforcement gigantochloa apus Djamil, Sofyan Suhot, Mohamed Azlan Hasan, Mohd. Zaki T Technology (General) Composite is a combination of two or more materials, where one type materials is mixed into another type of materials. Combining several different phases will create a material with performance better than the earlier phase of the constituent. In this study, a composite consisting of a polymer matrix by using a type of epoxy thermosets, reinforced using natural bamboo.The bamboo species used in these tests were GigantoacloaApus, age 3 – 4 years, collected from Bogor Indonesia. The bamboo were cut into lumber strip fiber parts using a cleaver and hand saw. The strip were cut by knife to thikcnesses of 0,5 mm – 1 mm and witdh 1,5 mm – 2 mm. The next process is to soak bamboo with 5% NaOH for 72 hours and dried at room temperature of27o C -29o C for 48 hours. The types of bamboo weave are plain weave, twill weave,basket, and 4 harness Satin, with laminate size 400 mm x 400 mm.x 1 mm. The manufacture process was by hand lay-up end cut with a laser, according to ASTMD 3039-08 standards. The orientation angles are of 0o, 45o, 90o, where each sample taken three specimens,furthermore, the tension test process.The result orientation angle 0o, the highest tensile strength at 4 harness satin woven type: 52.9833 N/mm2. Orientation angle of 45o to the highest value of tensile strength on the type of woven basket: 17.7230 N/mm2 at an angle of 90o orientation of the highest tensile strength values on the type of woven twill: 39, .5813 N/mm2. The orientation angle 0o, the highest strain at basket woven type: 3.2657%. Orientation angle of 45o to the highest value of strain on the type of woven basket: 11.3099% and at an angle of 90o orientation of the highest strain values on the type of woven basket: 3,.4976 %. 2015 Conference or Workshop Item PeerReviewed Djamil, Sofyan and Suhot, Mohamed Azlan and Hasan, Mohd. Zaki (2015) Tensile strength polymer matrix composite with reinforcement gigantochloa apus. In: 2nd International Conference on Engineering of Tarumanagara, 22-23 Oct, 2015, Indonesia. http://untar.ac.id/ft/2nd-international-conference-on-engineering-of-tarumanagara-2/?lang=en
institution Universiti Teknologi Malaysia
building UTM Library
collection Institutional Repository
continent Asia
country Malaysia
content_provider Universiti Teknologi Malaysia
content_source UTM Institutional Repository
url_provider http://eprints.utm.my/
topic T Technology (General)
spellingShingle T Technology (General)
Djamil, Sofyan
Suhot, Mohamed Azlan
Hasan, Mohd. Zaki
Tensile strength polymer matrix composite with reinforcement gigantochloa apus
description Composite is a combination of two or more materials, where one type materials is mixed into another type of materials. Combining several different phases will create a material with performance better than the earlier phase of the constituent. In this study, a composite consisting of a polymer matrix by using a type of epoxy thermosets, reinforced using natural bamboo.The bamboo species used in these tests were GigantoacloaApus, age 3 – 4 years, collected from Bogor Indonesia. The bamboo were cut into lumber strip fiber parts using a cleaver and hand saw. The strip were cut by knife to thikcnesses of 0,5 mm – 1 mm and witdh 1,5 mm – 2 mm. The next process is to soak bamboo with 5% NaOH for 72 hours and dried at room temperature of27o C -29o C for 48 hours. The types of bamboo weave are plain weave, twill weave,basket, and 4 harness Satin, with laminate size 400 mm x 400 mm.x 1 mm. The manufacture process was by hand lay-up end cut with a laser, according to ASTMD 3039-08 standards. The orientation angles are of 0o, 45o, 90o, where each sample taken three specimens,furthermore, the tension test process.The result orientation angle 0o, the highest tensile strength at 4 harness satin woven type: 52.9833 N/mm2. Orientation angle of 45o to the highest value of tensile strength on the type of woven basket: 17.7230 N/mm2 at an angle of 90o orientation of the highest tensile strength values on the type of woven twill: 39, .5813 N/mm2. The orientation angle 0o, the highest strain at basket woven type: 3.2657%. Orientation angle of 45o to the highest value of strain on the type of woven basket: 11.3099% and at an angle of 90o orientation of the highest strain values on the type of woven basket: 3,.4976 %.
format Conference or Workshop Item
author Djamil, Sofyan
Suhot, Mohamed Azlan
Hasan, Mohd. Zaki
author_facet Djamil, Sofyan
Suhot, Mohamed Azlan
Hasan, Mohd. Zaki
author_sort Djamil, Sofyan
title Tensile strength polymer matrix composite with reinforcement gigantochloa apus
title_short Tensile strength polymer matrix composite with reinforcement gigantochloa apus
title_full Tensile strength polymer matrix composite with reinforcement gigantochloa apus
title_fullStr Tensile strength polymer matrix composite with reinforcement gigantochloa apus
title_full_unstemmed Tensile strength polymer matrix composite with reinforcement gigantochloa apus
title_sort tensile strength polymer matrix composite with reinforcement gigantochloa apus
publishDate 2015
url http://eprints.utm.my/id/eprint/62183/
http://untar.ac.id/ft/2nd-international-conference-on-engineering-of-tarumanagara-2/?lang=en
_version_ 1643655347451199488