A Pencil-Beam Planar Dipole Array Antenna for IEEE 802.11ac Outdoor Access Point Routers

In this paper, a new design of pencil-beam planar dipole array antenna (PDAA) with reflector back has been designed and fabricated for IEEE 802.11ac outdoor applications. The proposed antenna is a planar array combined with a reflector. The planar array is comprised of 4 x 4 x 3 single elements whi...

وصف كامل

محفوظ في:
التفاصيل البيبلوغرافية
المؤلفون الرئيسيون: Tang, The Toan, Nguyen, Manh Hung, Nguyen, Tran Minh, Vu, Bang Giang
التنسيق: مقال
اللغة:English
منشور في: ĐHQGHN 2017
الموضوعات:
الوصول للمادة أونلاين:http://repository.vnu.edu.vn/handle/VNU_123/56893
الوسوم: إضافة وسم
لا توجد وسوم, كن أول من يضع وسما على هذه التسجيلة!
الوصف
الملخص:In this paper, a new design of pencil-beam planar dipole array antenna (PDAA) with reflector back has been designed and fabricated for IEEE 802.11ac outdoor applications. The proposed antenna is a planar array combined with a reflector. The planar array is comprised of 4 x 4 x 3 single elements which are placed on an FR4-epoxy substrate with the size of 241 mm x 194 mm x 1.6 mm. This design has very good simulation results in terms of the radiation pattern, gain and input impedance bandwidth. A very high gain of 18.2 dBi has been achieved at 5.5 GHz, and the bandwidth is relatively wide with about 23% of the center frequency, which covers the whole bandwidth allocated for the application. A prototype has been fabricated and measured. The measurement results have very good agreements with the simulated data.