The analysis of the thermal losses in a producer-gas-fired vertical-shaft lime kiln

The analysis of the thermal losses in a producer-gas-fired vertical-shaft lime kiln

Saved in:

書目詳細資料
主要作者:	Paez, Jose Miguel
格式:	text
語言:	English
出版:	Animo Repository 1956
主題:	Limekilns Chemical Engineering
在線閱讀:	https://animorepository.dlsu.edu.ph/etd_bachelors/607
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Sustainable utilization of lime kiln dust as active filler in hot mix asphalt with moisture damage resistance
由: Peerapong Jitsanigam, et al.
出版: (2018)

Assessment of Chemical Hazard from Decoration Firing Kiln in a Benjarong Porcelain Manufacturing Community Enterprise
由: Pakinee Rutchapan, et al.
出版: (2021)

A project feasibility study on the conversion of cement kilns from oil to coal firing
由: Soriano, Marcelino Q.
出版: (1978)

A feasibility study on the manufacture of lime
由: Gozum, Manuel P., et al.
出版: (1973)

Performance and evaluation of hot mix asphalt with an addition of lime kiln dust as a mineral filler based on Western Australia conditions
由: Peerapong Jitsangiam, et al.
出版: (2018)

Powering shuttle kilns with compressed biomethane gas for the Thai ceramic industry
由: Watit Puttapoun, et al.
出版: (2018)

Powering shuttle kilns with compressed biomethane gas for the Thai ceramic industry
由: Watit Puttapoun, et al.
出版: (2018)

Design of vertical shaft coconut husk fiber extracting machine.
由: De Luna, John Christian L., et al.
出版: (2013)

A study of fly ash-lime granule unfired brick
由: P. Chindaprasirt, et al.
出版: (2018)

Lightweight bricks made of diatomaceous earth, lime and gypsum
由: K. Pimraksa, et al.
出版: (2018)

Lightweight bricks made of diatomaceous earth, lime and gypsum
由: K. Pimraksa, et al.
出版: (2018)

Software Development of Mass and Thermal Energy Balance Evaluation in ILC Kiln System
由: Rifki Naufal Muhamad, Mochamad

Performance evaluation of premixed burner fueled with biomass derived producer gas
由: P. Punnarapong, et al.
出版: (2018)

Study of thermal property of glass-ceramics produced from soda lime glass waste by single-step sintering process
由: N. Kulrat, et al.
出版: (2018)

Study of thermal property of glass-ceramics produced from soda lime glass waste by single-step sintering process
由: N. Kulrat, et al.
出版: (2019)

Fresh produce antibacterial rinse from Kaffir Lime oil
由: Vimol Srisukh, et al.
出版: (2010)

DESIGN AND ANALYSIS OF ROTARY KILN AT DOLOMITE PROCESSING.
由: Yusuf Bachtiar, Moch

Impact of Vertical Integration Strategies on Environmental, Social, and Governance Sustainability: Policy Implication for Oil and Gas Energy Sector
由: Ali M.K.
出版: (2023)

Simulation of Producer Gas Combustion in a Premixed Burner for Ceramic Firing Process
由: Phitsanupong Punnarapong, et al.
出版: (2018)

Simulation of Producer Gas Combustion in a Premixed Burner for Ceramic Firing Process
由: Phitsanupong Punnarapong, et al.
出版: (2018)

The experimental study on pyrolysis of the cassava rhizome in the large scale metal kiln using flue gas
由: Karan Homchat, et al.
出版: (2018)

The experimental study on pyrolysis of the cassava rhizome in the large scale metal kiln using flue gas
由: Homchat K., et al.
出版: (2017)

Physical and chemical characteristics of cement produced with different ratio of Zn, Cr, and Ni in pilot-scale rotary cement kiln
由: Natt Dumkum
出版: (2012)

The dragon kilns of 20th-century Singapore
由: Ng, Phyllis Xiang Ting
出版: (2022)

Sustainability and thermoenvironmental indicators on the multiobjective optimization of the liquefied natural gas fired micro-cogeneration systems
由: Kanbur, Baris Burak, et al.
出版: (2021)

Kaffir lime leaf extract mediated synthesis, anticancer activities and antibacterial kinetics of Ag and Ag/AgCl nanoparticles
由: Chaiyos Chankaew, et al.
出版: (2018)

Design of shaftings
由: Guerra, Nicanor M.
出版: (1956)

The utilization of carbide lime for the production of cinder bricks and unfired insulation materials
由: Ayson, Chona Corazon, et al.
出版: (1995)

Effect of ovality of shaft/hole on interference fits between shaft and hole
由: Kamaraj, Ramaiah
出版: (2021)

Effect of ovality of shaft/hole on interference fits between shaft and hole
由: Koh, Ying Chong
出版: (2019)

THE MAKING OF HERITAGE: FANNING THE FLAMES OF SINGAPORE’S OLDEST DRAGON KILN
由: AW JIE MIN JESMINE
出版: (2020)

Finite element analysis of traditional and new fixation techniques of the 3d-printed composite interlocking nail in canine femoral shaft fractures
由: Siwasit Pitjamit, et al.
出版: (2020)

Fire and consequential loss of commercial property in Singapore
由: Sho, Choon Kim, et al.
出版: (2015)

A shaft of light
由: Soriano, Rafaelita Hilario
出版: (1991)

Sustaining metal–organic frameworks for water–gas shift catalysis by non-thermal plasma
由: Shaojun Xu, et al.
出版: (2019)

Synergistic interaction between inorganic layered materials and intumescent fire retardants for advanced fire protection
由: Hu, Xiaochun, et al.
出版: (2022)

MODIFIKASI SAMPLER KILN FEED di PT HOLCIM INDONESIA Tbk.
由: , HARRY PRASETYO, et al.
出版: (2013)

Model calculation of a solar assisted system for a malt kiln
由: Manfred Hauner, et al.
出版: (2019)

Creative Destruction: The Commodification of Industrial Heritage Tourism in Nanfeng Kiln District
由: Xueke Yang, et al.
出版: (2019)

Analysis of printer shaft non-conformities
由: Lieu, Swee Keng.
出版: (2009)