A new damage-mechanics-based model for rolling contact fatigue analysis of cylindrical roller bearing

A new damage-mechanics-based model for rolling contact fatigue analysis of cylindrical roller bearing

The cyclic contact stresses in cylindrical roller bearings are evaluated through the explicit finite element analysis with rolling the roller instead of moving a constant contact pressure in the computational domain. A new damage evolution equation in terms of the amplitude of octahedral shear stres...

Saved in:

書目詳細資料
Main Authors:	Li, Fukai, Hu, Weiping, Meng, Qingchun, Zhan, Zhixin, Shen, Fei
其他作者:	School of Mechanical and Aerospace Engineering
格式:	Article
語言:	English
出版:	2020
主題:	Engineering::Mechanical engineering Rolling Contact Fatigue Damage Mechanics
在線閱讀:	https://hdl.handle.net/10356/141538
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Effect of slip to roll ratio on cyclic plastic deformation response at subsurface during rolling contact fatigue
由: Paul, Surajit Kumar, et al.
出版: (2023)

Online monitoring of fatigue damage in welded joints using diffuse ultrasound
由: Gao, Shuling, et al.
出版: (2024)

A novel approach based on the elastoplastic fatigue damage and machine learning models for life prediction of aerospace alloy parts fabricated by additive manufacturing
由: Zhan, Zhixin, et al.
出版: (2022)

Optimization of Deep Rolling Temperature for Fatigue Lifetime Enhancement of Martensitic Stainless Steel AISI 440C
由: Sai-yan Primee, et al.
出版: (2020)

Development of a novel fatigue damage model with AM effects for life prediction of commonly-used alloys in aerospace
由: Zhan, Zhixin, et al.
出版: (2020)

Online monitoring of fatigue damage using ultrasonic methods
由: Tay, Kian Yang
出版: (2024)

A study on the flow forming of cylindrical tubes
由: Lee, K.S, et al.
出版: (2014)

Contact mechanics in tribological and contact damage-related problems: a review
由: Li, Biao, et al.
出版: (2022)

A review on sliding vane and rolling piston compressors
由: Aw, Kuan Thai, et al.
出版: (2023)

Machine learning based fatigue life prediction with effects of additive manufacturing process parameters for printed SS 316L
由: Zhan, Zhixin, et al.
出版: (2022)

ULTRAVIOLET ROLL-TO-ROLL NANOIMPRINT LITHOGRAPHIC FABRICATION OF FLEXIBLE POLYMER MOULDS
由: JARRETT JONATHAN DUMOND
出版: (2014)

Mechanical fatigue of human red blood cells
由: Qiang, Yuhao, et al.
出版: (2019)

Microstructural study of bearing material failure due to rolling contact fatigue in wind turbine gearbox
由: Maharjan, Niroj, et al.
出版: (2020)

Rolling bearings fault diagnosis based on two-stage signal fusion and deep multi-scale multi-sensor network
由: Pan, Zuozhou, et al.
出版: (2024)

The Philippines’ roll-on/roll-off policy and its impact on household income
由: Francisco, Kris A., et al.
出版: (2020)

A feasibility study on running roll on-roll off (RORO) vessel plying the Balingoan Misamis Orienta to Benoni Camiguin route
由: Kim Lim, Nestor L.
出版: (2003)

Effect of deep cold rolling on residual stress distributions between the treated and untreated regions Ti–6Al–4V alloy
由: Lim, Andre, et al.
出版: (2018)

Microstructural characteristics and strengthening mechanisms in a polycrystalline Ni-based superalloy under deep cold rolling
由: Kumar, Dharmesh, et al.
出版: (2020)

A mesoscopic damage model for the low-cycle fatigue of an extruded magnesium alloy
由: Wang, Ziyi, et al.
出版: (2023)

Rebound control in multipass roll forming of cap-shaped parts based on segmental boundary optimization function
由: Su, Chunjian, et al.
出版: (2023)

Predictive models for fatigue property of laser powder bed fusion stainless steel 316L
由: Zhang, Meng, et al.
出版: (2020)

Influence of weld toe radii on fatigue life prediction
由: Pang, John Hock Lye, et al.
出版: (2018)

An isogeometric-meshfree coupling approach for contact problems by using the third medium method
由: Huang, Jiazhao, et al.
出版: (2020)

Influence of residual stress distribution and microstructural characteristics on fatigue failure mechanism in Ni-based Superalloy
由: Kumar, Dharmesh, et al.
出版: (2022)

Development of a finite element analysis model for fatigue crack propagation of energy storage flywheel rotors
由: Nuñez, Ailene B.
出版: (2023)

Nonlinear heave-roll coupling and ship rolling
由: Liaw, C.Y., et al.
出版: (2014)

Fatigue life calculation for TC4-TC11 titanium alloy specimens fabricated by laser melting deposition
由: Zhan, Zhixin
出版: (2020)

Enabling grasp action : generalized quality evaluation of grasp stability via contact stiffness from contact mechanics insight
由: Dong, Huixu, et al.
出版: (2020)

Snap-through eversion of axisymmetric shells under contact indentation
由: Huang, Weicheng, et al.
出版: (2025)

Fatigue behaviour of AA6061-T6 alloys in the corrosive environment
由: Li, Peifeng, et al.
出版: (2018)

High cycle fatigue life prediction of laser additive manufactured stainless steel : a machine learning approach
由: Zhang, Meng, et al.
出版: (2020)

Fracture and fatigue in additively manufactured metals
由: Becker, Thorsten Hermann, et al.
出版: (2022)

DAMAGE MODELLING OF CONCRETE UNDER DYNAMIC LOADING
由: LIU ZHUANGJIAN
出版: (2019)

DAMAGE MODELLING OF CONCRETE UNDER DYNAMIC LOADING
由: LIU ZHUANGJIAN
出版: (2019)

Enhancement in fatigue performance of FRP composites with various fillers: a review
由: Sharma, Anurag, et al.
出版: (2023)

Commentary on "jamming transition in a two-dimensional open granular pile with rolling resistance"
由: Arévalo, Roberto
出版: (2021)

Review of fatigue fracture behaviours of materials made by laser powder bed fusion
由: Wei, Jun, et al.
出版: (2018)

Nonlinear heave-roll coupling motions of cylindrical structures in sea wave
由: Tan, Desmond Jun Ming.
出版: (2009)

Physical modelling with application to metal working, especially to hot rolling
由: Wong, S.F., et al.
出版: (2014)

High cycle fatigue in selective laser melted Ti-6Al-4V
由: Kumar, Punit, et al.
出版: (2022)