Comparison study on additive manufacturing (AM) and powder metallurgy (PM) AlSi10Mg alloys

Comparison study on additive manufacturing (AM) and powder metallurgy (PM) AlSi10Mg alloys

The microstructural and mechanical properties of AlSi10Mg alloys fabricated by additive manufacturing (AM) and powder metallurgy (PM) routes were investigated and compared. The microstructures were examined by scanning electron microscopy assisted with electron-dispersive spectroscopy. The crystalli...

Saved in:

書目詳細資料
Main Authors:	Chen, Biao, Moon, Seung Ki, Yao, Xiling, Bi, Guijun, Shen, Jianghua, Umeda, Junko, Kondoh, Katsuyoshi
其他作者:	School of Mechanical and Aerospace Engineering
格式:	Article
語言:	English
出版:	2020
主題:	Engineering::Materials Additive Manufacturing AlSi10Mg Alloys
在線閱讀:	https://hdl.handle.net/10356/142122
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!
機構:	Nanyang Technological University
語言:	English

相似書籍

Selective laser melting of AlSi10Mg : effects of scan direction, part placement and inert gas flow velocity on tensile strength
由: Ahmad Bin Anwar, et al.
出版: (2020)

Joining of 3D-printed AlSi10Mg by friction stir welding
由: Du, Zhenglin, et al.
出版: (2020)

Fabrication of heat sinks by Selective Laser Melting for convective heat transfer applications
由: Wong, Kin Keong, et al.
出版: (2021)

Multidisciplinary design optimization foradditive manufactured customized products
由: Yao, Xiling, et al.
出版: (2016)

Structural changes and thermal stability of mechanically alloyed Ti-Al powders with additions of Mn and Nb
由: Lu, L., et al.
出版: (2014)

Investigation of the electrochemical breakdown response in sensitised aa5083 aluminium alloy
由: Liew, YanHan, et al.
出版: (2022)

Multidisciplinary design optimization to identify additive manufacturing resources in customized product development
由: Yao, Xiling, et al.
出版: (2018)

Influence of process control agent on interdiffusion between Al and Mg during mechanical alloying
由: Lu, L., et al.
出版: (2014)

An additive manufacturing process model for product family design
由: Lei, Ningrong, et al.
出版: (2017)

A Cost-Driven Design Methodology for Additive Manufactured Variable Platforms in Product Families
由: Yao, Xiling, et al.
出版: (2016)

A multi-material part design framework in additive manufacturing
由: Yao, Xiling, et al.
出版: (2019)

Microstructure and Mechanical Properties of a Mg-5Al Alloy Synthesized by Mechanical Alloying
由: Gao, X., et al.
出版: (2014)

Effects of heat treatment on microstructures and tensile properties of IN718/TiC nanocomposite fabricated by selective laser melting
由: Yao, Xiling, et al.
出版: (2019)

Grain size dependent tensile behavior of Mg-3%Al alloy at elevated temperatures
由: Mallick, A., et al.
出版: (2014)

Dramatic effect of a small amount of MgO addition on the sintering of Al2O3-5 vol% SiC nanocomposite
由: Wang, J., et al.
出版: (2014)

The influence of heat treatment on the corrosion behaviour of amorphous melt-spun binary Mg-18 at.% Ni and Mg-21 at.% Cu alloy
由: Ong, M.S., et al.
出版: (2014)

Structure and properties of Mg-Al-Ti-B alloys synthesized via mechanical alloying
由: Lu, L., et al.
出版: (2014)

Geometric influence of the laser-based powder bed fusion process in Ti6AL4V and AlSi10Mg
由: Chua, Zhong Yang, et al.
出版: (2021)

DSC analysis of the effect of processing technique on the dissolution/precipitation reactions in a hypereutectic Al-Si alloy
由: Gupta, M., et al.
出版: (2014)

Data-driven adaptive control for laser-based additive manufacturing with automatic controller tuning
由: Chen, Lequn, et al.
出版: (2021)

Kinetics of grain growth in nanocrystalline magnesium-based metal-metal composite synthesized by mechanical alloying
由: Thein, M.A., et al.
出版: (2014)

Processing and deformation mechanisms of bulk ultrafine grained and nanostructured Mg alloy via mechanical alloying technique
由: CHUA BENG WAH
出版: (2010)

Microstructure and mechanical behavior of laser aided additive manufactured low carbon interstitial Fe₄₉.₅Mn₃₀Co₁₀Cr₁₀C₀.₅ multicomponent alloy
由: Chew, Youxiang, et al.
出版: (2022)

Boiling effect in crater development on magnesium surface induced by laser melting
由: Guan, Yingchun, et al.
出版: (2016)

Dissolution of Mg-based Mg-Ni-Nd amorphous alloys in 3% NaCl solution
由: Li, Y., et al.
出版: (2014)

Topological and kinetics considerations in the glass formation of AL-rich AL-Ni based alloys
由: LIM KAI YANG
出版: (2010)

Mechanical properties of nanocrystalline Mg-Al-Ti alloys
由: Thein, M.A., et al.
出版: (2014)

Influence of the geometric factor for the width of the contour scan in selective laser melting
由: Ahn, Il Hyuk, et al.
出版: (2016)

Microstructure evolution and mechanical property response via 3D printing parameter development of Al–Sc alloy
由: Kuo, C. N., et al.
出版: (2021)

Tensile strength and ductility improvement of magnesium by using ball milled Al-CNT particles as reinforcement
由: Habibi, M.K., et al.
出版: (2014)

Hole design quality identification in laser aided additive manufacturing
由: Ahn, Il Hyuk, et al.
出版: (2019)

Numerical and experimental study of laser aided additive manufacturing for melt-pool profile and grain orientation analysis
由: Song, Jie, et al.
出版: (2020)

Mechanical properties of nanostructured Mg-5 wt%Al-x wt%AlN composite synthesized from Mg chips
由: Thein, M.A., et al.
出版: (2014)

Metallurgy study of laser welded nickel and aluminum joint
由: Khor, Wei Teik
出版: (2019)

The potential of copper alloy as alternative material for post and core applications.
由: Somchai Urapepon, et al.
出版: (2015)

Investigation On The Structure And Magnetic Properties Of Co2MnSi Heusler Alloy For Spintronic Application
由: JI XIN
出版: (2010)

Phase stability of magnesium-rare earth binary systems from first-principles calculations
由: Tao, X., et al.
出版: (2014)

Mechanical properties and microstructure of Magnesium Alloy from Severe Plastic Deformation
由: SU CHUN WEI
出版: (2010)

Multisensor fusion-based digital twin for localized quality prediction in robotic laser-directed energy deposition
由: Chen, Lequn, et al.
出版: (2023)

Atomic clusters in decagonal Al–Cr–Fe : hexagon, star and decagon
由: Li, Rui Tao, et al.
出版: (2020)