Design of a fully differential controlled gain open-loop wideband amplifier with high PSRR
Fully differential amplifier has a superior ability of noise immunity. It has been widely used in audio, data transmission, and telephone systems. This project involves the design of a fully differential controlled-gain open-loop wideband amplifier with high PSR on 55nm CMOS technology. The fu...
محفوظ في:
| المؤلف الرئيسي: | |
|---|---|
| مؤلفون آخرون: | |
| التنسيق: | Final Year Project |
| اللغة: | English |
| منشور في: |
Nanyang Technological University
2022
|
| الموضوعات: | |
| الوصول للمادة أونلاين: | https://hdl.handle.net/10356/157647 |
| الوسوم: |
إضافة وسم
لا توجد وسوم, كن أول من يضع وسما على هذه التسجيلة!
|
| الملخص: | Fully differential amplifier has a superior ability of noise immunity. It has been widely
used in audio, data transmission, and telephone systems. This project involves the design
of a fully differential controlled-gain open-loop wideband amplifier with high PSR on
55nm CMOS technology. The fully differential wideband amplifier maintains the
common mode output voltage at 0.6V through a common-mode feedback circuit. The
1.2V voltage supply voltage has a power dissipation of 0.573mW under DC operation.
The design achieved a controlled open-loop voltage gain of 12.399dB, with a unity gain
bandwidth of 557 MHz, with a load of 100fF on each output. The output voltage can
provide a swing from 0.152V to 1.074V. The total harmonic distortion of – 46.6 dB for
50mV differential input signals. The wideband amplifier is capable of CMR (single-ended)
= -53.53dB, PSR (single-ended) = -41.34dB when common-mode signal is injected from
input and the respective supply. The total layout area is 80μm x 35μm for the
implementation of all the required devices. |
|---|