High-energy mid-infrared intrapulse difference-frequency generation with 5.3% conversion efficiency driven at 3 µm

• المؤلفون الرئيسيون: Liu, Kun, Liang, Houkun, Qu, Shizhen, Li, Wenkai, Zou, Xiao, Zhang, Ying, Wang, Qi Jie
• مؤلفون آخرون: School of Electrical and Electronic Engineering
• التنسيق: مقال
• اللغة: English
• منشور في: 2022
• الموضوعات: Engineering::Electrical and electronic engineering; Infrared Devices; Difference-Frequency Generation
• الوصول للمادة أونلاين: https://hdl.handle.net/10356/161853
• المؤسسة: Nanyang Technological University

Intrapulse difference-frequency generation (IPDFG) is a relatively simple technique to produce few-cycle mid-infrared (MIR) radiations. The conversion efficiency of IPDFG could be potentially improved by using the long driving wavelength to reduce the quantum defect. In this paper, we report a high-energy MIR IPDFG source with a record-high conversion efficiency of up to 5.3%, driven by 3 µm, 35 fs, 10 kHz pulses. The IPDFG output has a 5 µJ pulse energy and 50 mW average power. It spans over a spectral range from 6 to 13.2 µm. A 68 fs of IPDFG pulse width is measured, corresponding to 2.1 cycles, centered at 9.7 µm. The high-energy, two-cycle IPDFG pulses are used to produce a 3-octave supercontinuum in a KRS-5 crystal, spanning from 2 to 16 µm, with a 2.4 µJ pulse energy and a 24 mW average power.