Effect of laser shock peening on inconel 718 for hydrogen embrittlement

Effect of laser shock peening on inconel 718 for hydrogen embrittlement

This study investigates the effects of Laser Shock Peening on Inconel 718 for hydrogen embrittlement. Cylindrical dog bone samples of Inconel 718 were made by forging and machining (milling). The resultant dog bone samples were subjected to Laser Shock Peening at the Advanced Remanufacturing and Tec...

Saved in:

書目詳細資料
主要作者:	Mahesh, Aditya
其他作者:	Sridhar Idapalapati
格式:	Final Year Project
語言:	English
出版:	Nanyang Technological University 2024
主題:	Engineering Laser shock peening Hydrogen embrittlement Inconel 718
在線閱讀:	https://hdl.handle.net/10356/177545
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!
機構:	Nanyang Technological University
語言:	English

相似書籍

Induction brazing for rapid localized repair of Inconel 718
由: Aprilia, A., et al.
出版: (2022)

Performance of CBN cutting tools in facing of age hardened inconel 718
由: Arunachalam, R.M., et al.
出版: (2014)

Corrosion evolution of 316L stainless steel after ultrasonic severe surface rolling and laser shock peening processing
由: Jinlong, Lv, et al.
出版: (2024)

Deposition characteristics of cold sprayed Inconel 718 particles on Inconel 718 substrates with different surface conditions
由: Sun, Wen, et al.
出版: (2019)

Laser peening of 420 martensitic stainless steel using ultrashort laser pulses
由: Maharjan, N., et al.
出版: (2021)

Hole quality in drilling of annealed inconel 718
由: Alsagoff, S.E., et al.
出版: (2014)

Hole quality in drilling of annealed inconel 718
由: Alsagoff, S.E., et al.
出版: (2014)

Strategy of incorporating Ni-based braze alloy in cold sprayed Inconel 718 coating
由: Sun, Wen, et al.
出版: (2021)

Surface integrity study of shot peened IN718
由: Nur Harith Bin Sazeli
出版: (2024)

The machinability and residual stresses in facing of inconel 718
由: ARUNACHALAM RAMANATHAN
出版: (2019)

Evaluation of ultrasonic vibration cutting while machining inconel 718
由: Nath, C., et al.
出版: (2014)

Tribological behavior of cold sprayed Inconel 718 coatings at room and elevated temperatures
由: Sun, Wen, et al.
出版: (2022)

A comparative analysis of laser additive manufacturing of high layer thickness pure Ti and inconel 718 alloy materials using finite element method
由: Singh, Sapam Ningthemba, et al.
出版: (2022)

Improving microstructural and mechanical characteristics of cold-sprayed Inconel 718 deposits via local induction heat treatment
由: Sun, Wen, et al.
出版: (2020)

A STUDY ON BURNISHING AND SELF-PILOTING MECHANISM FOR HIGH PRECISION DEEP HOLE DRILLING OF INCONEL 718
由: MALARVIZHI SANKARANARAYANASAMY
出版: (2017)

Residual stress and surface roughness when facing age hardened Inconel 718 with CBN and ceramic cutting tools
由: Arunachalam, R.M., et al.
出版: (2014)

A STUDY ON THE IMPROVEMENT OF HOLE STRAIGHTNESS IN GUNDRILLING OF INCONEL-718
由: LEW MAAN TARNG
出版: (2018)

High speed facing of age hardened Inconel 718 using silicon carbide whisker reinforced ceramic tools
由: Arunachalam, R.M., et al.
出版: (2014)

An investigation of cutting forces and surface damage in high-speed turning of Inconel 718
由: Pawade, R.S., et al.
出版: (2014)

Surface Finish and Residual Stresses in Facing of Age Hardened INCONEL 718
由: Arunachalam, R.M., et al.
出版: (2014)

MECHANISM RESEARCH AND SURFACE QUALITY OPTIMIZATION OF ROBOTIC BELT GRINDING INCONEL 718
由: HUANG XIAOKANG
出版: (2024)

Surface integrity when machining age hardened Inconel 718 with coated carbide cutting tools
由: Arunachalam, R.M., et al.
出版: (2014)

Evaluation of dynamic strain aging behaviour of additively manufactured inconel 718
由: Sriram, T.
出版: (2024)

A STUDY ON STRAIGHTNESS CONTROL IN DEEP HOLE DRILLING OF INCONEL-718
由: AKSHAY CHAUDHARI
出版: (2016)

Comparison of surface roughness and residual stresses induced by coated carbide, ceramic and CBN cutting tools in high speed facing of Inconel 718
由: Arunachalam, R.M., et al.
出版: (2014)

Understanding hydrogen diffusion mechanisms in doped α-Fe through DFT calculations
由: Zhu, Lixia, et al.
出版: (2023)

Laser shock peening for microstructure tailoring of additive manufactured Inconel 718 parts
由: Heng, Zi Yun
出版: (2020)

Distinct effects of in-situ and ex-situ hydrogen charging methods on the mechanical behavior of CoCrFeNi high-entropy alloy fabricated by laser-powder bed fusion
由: Lee, Dong-Hyun, et al.
出版: (2023)

Investigation of hydrogen embrittlement resistance of as-printed and surface treated Inconel 718
由: Mohammad Faizal Bin Abdul Rahman
出版: (2024)

Investigating the hydrogen embrittlement resistance of 3D printed inconel 718
由: Lai, Yanfang
出版: (2022)

Embrittlement of a bulk metallic glass due to low-temperature annealing
由: Ramamurty, U., et al.
出版: (2014)

Development and design optimisation of digital intensity measurement system for shot peening
由: Tarani, Dinesh Kumar
出版: (2024)

CHARACTERIZATION OF 3D PRINT NICKEL BASED SUPERALLOY FOR OIL AND GAS DRILLING APPLICATIONS
由: ANG JUN WEI
出版: (2022)

Effect of shot peening process on the fatigue life of shot peened low alloy steel
由: Trung, Pham Quang, et al.
出版: (2019)

Investigation on microstructure and mechanical properties of inconel 725 printed by direct energy deposition
由: Lim, Aloysius Huan Da
出版: (2024)

Effects of shot peening pressure on friction and wear of high pressure cold sprayed Ti-6Al-4V coatings under dry and lubrication conditions
由: Khun, Nay Win, et al.
出版: (2024)

Characteristics of Ni-Nb-based metallic amorphous alloys for hydrogen-related energy applications
由: Jayalakshmi, S., et al.
出版: (2014)

Microstructures and Texture of Inconel 718 Alloy Fabricated by Selective Laser Melting
由: Shuai, Li, et al.
出版: (2016)

Numerical modeling of residual stresses during vibratory peening of a 3-stage Blisk – a multi-scale discrete element and finite element approach
由: Alcaraz, Joselito Yam Tomacder, et al.
出版: (2022)

A numerical and experimental study of distribution of the residual stress on the shot peened low alloy steel
由: Trung, Pham Quang, et al.
出版: (2019)