Load settlement characteristics of piled rafts in sand
This study investigates the effects of pile numbers, pile length, pile spacing and pile diameters on the load-settlement response of a piled raft in dense sand through model tests. A total of 17 tests were conducted to study how varying the parameters would affect the load-settlement response of pil...
Saved in:
| 主要作者: | |
|---|---|
| 其他作者: | |
| 格式: | Final Year Project |
| 語言: | English |
| 出版: |
2011
|
| 主題: | |
| 在線閱讀: | http://hdl.handle.net/10356/45026 |
| 標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
| 總結: | This study investigates the effects of pile numbers, pile length, pile spacing and pile diameters on the load-settlement response of a piled raft in dense sand through model tests. A total of 17 tests were conducted to study how varying the parameters would affect the load-settlement response of piled rafts in which the piles act as settlement reducers. The effects of pile numbers and pile length on the load-settlement response of a piled raft will be covered in detail this paper.Preparation of the sand bed in which the tests were conducted in was an important part of the
tests as the sand beds produced needed to be reproducible. Air pluviation technique was
selected to prepare the sand bed for the tests as it was the most efficient method which gave
consistent results. The sand was loaded into a hopper before being pluviated from a fall height
of 1 m. The sand beds produced were relatively dense and reproducible across the tests. |
|---|