Performance study on a floating wind turbine

• المؤلف الرئيسي: Lim, Pin Hong.
• مؤلفون آخرون: School of Mechanical and Aerospace Engineering
• التنسيق: Final Year Project
• اللغة: English
• منشور في: 2013
• الموضوعات: DRNTU::Engineering::Mechanical engineering
• الوصول للمادة أونلاين: http://hdl.handle.net/10356/53549
• المؤسسة: Nanyang Technological University

The effects of wave motions on the performance of an offshore floating wind turbine were studied by conducting experiments in a controlled environment inside a wind tunnel. Wave forces applied on the wind turbine structure can induce motions of multiple degrees of motion. By separating the motions to individual degree of freedom, a better understanding of how each motion affects the performance of the wind turbine can be achieved. In this study, the heave motion was chosen. To mimic the heave motion of a wave, a linear actuator was used. To create a wave model closest to an actual sine wave, a segmented sine wave model was adopted. With the help of the Froude scaling law, proper comparisons between the model and the actual full-scale structure could be made. The experiment used triangle waves to study heave motion without a wave pattern, segmented sine wave to study how it differs from triangle waves and finally segmented waves following the Froude scaling to study the effects when translated to a real full-scale structure. The study concluded that the heave- motion effects are insignificant when converted to real full-scale, which however may be subjected to inaccuracy in measurements due to the equipment used. A study with the combination of all degrees of freedom is worth looking into in the future.