Experiment of microfluidic chip for biomolecule sensing
This final year project report is about the study of photonic sensing of the bacteria, E. coli, through a process called fluorescence intensity test. UV-light is shined onto the sample to see if there was any emission light under the microscope to indicate the presence of E. coli. Moreover, the d...
محفوظ في:
| المؤلف الرئيسي: | |
|---|---|
| مؤلفون آخرون: | |
| التنسيق: | Final Year Project |
| اللغة: | English |
| منشور في: |
2018
|
| الموضوعات: | |
| الوصول للمادة أونلاين: | http://hdl.handle.net/10356/75266 |
| الوسوم: |
إضافة وسم
لا توجد وسوم, كن أول من يضع وسما على هذه التسجيلة!
|
| المؤسسة: | Nanyang Technological University |
| اللغة: | English |
| الملخص: | This final year project report is about the study of photonic sensing of the bacteria, E. coli,
through a process called fluorescence intensity test. UV-light is shined onto the sample to see
if there was any emission light under the microscope to indicate the presence of E. coli.
Moreover, the design and fabrication of microfluidic chip to reduce the sample requires and
shorten the time taken for detection.
The chips were made of either acrylic or silicone. After further test are carried out, silicone
chips proved to be better compared to acrylic and hence was met for this final year project. The
chips were loaded with different samples of E. Coli using a syringe pump. After ensuring that
sample were fully loaded into the chips with no air bubbles in it, it was then place under a
microscope to expose to UV light to check for any E. Coli in the chip.
This technique was shown to reduce the sample required as well as the time taken to detect the
E. Coli in the sample. |
|---|