Review Of The Fatigue Performance Of Stainless Steel 316L Parts Manufactured By Selective Laser Melting

Review Of The Fatigue Performance Of Stainless Steel 316L Parts Manufactured By Selective Laser Melting

The powder bed additive manufacturing (AM) process is known to produce defects that can trigger premature fatigue failure under the service loads. Material testing on metallic AM parts thus far has focused on the static mechanical properties, although the fatigue strength is highly pertinent due to...

Saved in:

書目詳細資料
Main Authors:	Zhang, Meng, Li, Hua, Zhang, Xiang, Hardacre, David
其他作者:	School of Mechanical and Aerospace Engineering
格式:	Conference or Workshop Item
語言:	English
出版:	2016
主題:	Additive Manufacturing Selective Laser Melting
在線閱讀:	https://hdl.handle.net/10356/84380 http://hdl.handle.net/10220/41770
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Effects of chamber oxygen concentration on microstructure and mechanical properties of stainless steel 316L parts by selective laser melting
由: Sun, Zhongji, et al.
出版: (2018)

Investigation on the integral effects of process parameters on properties of selective laser melted stainless steel parts
由: Choong, Yu Ying Clarrisa, et al.
出版: (2018)

Microstructures and Texture of Inconel 718 Alloy Fabricated by Selective Laser Melting
由: Shuai, Li, et al.
出版: (2016)

Selective Laser Melting Of Spodumene: An Exploratory Study
由: Gan, Mingxuan, et al.
出版: (2016)

Selective laser melting of stainless steel 316L with low porosity and high build rates
由: Sun, Zhongji, et al.
出版: (2016)

Properties of selective laser melted spodumene glass-ceramic
由: Gan, Ming Xuan, et al.
出版: (2018)

Process parameter optimization and mechanical properties for additively manufactured stainless steel 316L parts by selective electron beam melting
由: Wang, Chengcheng, et al.
出版: (2020)

Influence of the geometric factor for the width of the contour scan in selective laser melting
由: Ahn, Il Hyuk, et al.
出版: (2016)

Process parameter optimization for additively manufactured stainless steel 316L parts by selective electron beam melting
由: Wang, Chengcheng, et al.
出版: (2018)

Study and modeling of melt pool evolution in selective laser melting process of SS316L
由: Tan, J. L., et al.
出版: (2019)

SELECTIVE LASER MELTING OF HIGH PERFORMANCE FERROUS ALLOYS
由: TAN YONG HAO
出版: (2022)

Methods of residual stress reduction for metal parts manufactured using selective laser melting (a review)
由: Li, Hua, et al.
出版: (2018)

Recrystallization-based grain boundary engineering of 316L stainless steel produced via selective laser melting
由: Gao, Shubo, et al.
出版: (2022)

Simultaneously enhanced strength and ductility for 3D-printed stainless steel 316L by selective laser melting
由: Sun, Zhongji, et al.
出版: (2018)

316L stainless steel manufactured by selective laser melting and its biocompatibility with or without hydroxyapatite coating
由: Luo, J., et al.
出版: (2022)

Evaluation of Residual Stress in Selective Laser Melting of 316L Steel
由: Yadroitsava, Ina, et al.
出版: (2016)

Densifying method in additive manufacturing process of H13 tool steel : laser re-melting
由: Choe, Jungho, et al.
出版: (2018)

On the study of keyhole-mode melting in selective laser melting process
由: Le, Kim Quy, et al.
出版: (2020)

Discontinuity of overhanging melt track in selective laser melting process
由: Le, Kim Quy, et al.
出版: (2020)

Mitigation of liquation cracking in selective laser melted Inconel 718 through optimization of layer thickness and laser energy density
由: Luu, Duy Nghia, et al.
出版: (2022)

Producing Hip Implants Of Titanium Alloys By Additive Manufacturing
由: Evgenii, Borisov, et al.
出版: (2016)

Characterization of carbide particle-reinforced 316L stainless steel fabricated by selective laser melting
由: Bhowmik, Ayan, et al.
出版: (2022)

On the corrosion resistance of some selective laser melted alloys
由: Suryawanshi, Jyoti, et al.
出版: (2021)

Laser re-scanning strategy in selective laser melting for part quality enhancement : a review
由: Huang, Sheng, et al.
出版: (2018)

Simulating The Dynamic Deformation Behaviour Of Selective Laser Melted Stainless Steel Microlattice Structures
由: Li, Peifeng
出版: (2016)

Tribological properties of selective laser melted Al–12Si alloy
由: Rathod, Hemant J., et al.
出版: (2021)

Effects of re-melting strategies on densification behavior and mechanical properties of selective laser melted AlSi10Mg parts
由: Chua, Chee Kai, et al.
出版: (2018)

Selective laser melting of titanium alloy with 50 wt% tantalum : microstructure and mechanical properties
由: Sing, Swee Leong, et al.
出版: (2022)

Spatter transport by inert gas flow in selective laser melting : a simulation study
由: Ahmad Bin Anwar, et al.
出版: (2020)

Additively-manufactured metallic porous lattice heat exchangers for air-side heat transfer enhancement
由: Ho, Jin Yao, et al.
出版: (2021)

Study of the spatter distribution on the powder bed during selective laser melting
由: Ahmad Bin Anwar, et al.
出版: (2019)

Porosity formation in selective laser melting of spodumene
由: Gan, Ming Xuan, et al.
出版: (2018)

Influence of scanning strategy and building direction on microstructure and corrosion behaviour of selective laser melted 316L stainless steel
由: Zhao, Cuiling, et al.
出版: (2022)

A study on the influence of powder packing density on the melt track in the selective laser melting process
由: Le, Kim Quy, et al.
出版: (2018)

Fatigue and fracture behaviour of laser powder bed fusion stainless steel 316L : influence of processing parameters
由: Zhang, Meng, et al.
出版: (2020)

Initial Study of Selective Laser Melting of ZrO2/Al2O3 Ceramic
由: Zhao, Ziqiang, et al.
出版: (2016)

Surface quality and material removal in magnetic abrasive finishing of selective laser melted 316L stainless steel
由: Zhang, J., et al.
出版: (2020)

A thermo-mechanical coupling model for predicting temperature and residual stress fields in selective laser melting
由: Tan, Pengfei, et al.
出版: (2018)

Direct Manufacture of Non-Assembly Mechanism by Selective Laser Melting
由: Wang, Di, et al.
出版: (2016)

Direct Metal Tool Fabrication of AISI 420 Tool Steel by Selective Laser Melting
由: Zhao, Xiao, et al.
出版: (2016)