Adsorption cooling cycles: Insights into carbon dioxide adsorption on activated carbons
We present an extensive study to measure CO2 uptakes on various AC (activated carbons) such as Maxsorb III, ACF-A20, BPL, Norit and honeycomb monolith for the temperatures ranging from 303 K to 363 K and pressures up to 10 MPa. These adsorbent samples were characterized using adsorption of nitrogen,...
Saved in:
| Main Authors: | , , |
|---|---|
| 其他作者: | |
| 格式: | Article |
| 語言: | English |
| 出版: |
2017
|
| 主題: | |
| 在線閱讀: | https://hdl.handle.net/10356/85812 http://hdl.handle.net/10220/43833 |
| 標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
| 總結: | We present an extensive study to measure CO2 uptakes on various AC (activated carbons) such as Maxsorb III, ACF-A20, BPL, Norit and honeycomb monolith for the temperatures ranging from 303 K to 363 K and pressures up to 10 MPa. These adsorbent samples were characterized using adsorption of nitrogen, XRD (X-ray diffraction), FTIR (Fourier transform infrared) and SEM (scanning electron micrography). The isosteric heat of adsorption (Qst) at low surface coverage is calculated form experimentally measured isotherm data. In this paper, the Qst at low surface coverage is calculated theoretically as a function of the collision diameter and the well depth potential of activated carbons – CO2 system. These results are compared with experimental data. Employing thermodynamic frameworks of adsorbent – adsorbate system and Qst formulation as a function of adsorbent pore widths, the COP (coefficient of performance) of adsorption cooler is calculated for various heat source and cooling load temperatures. It is found that the COP is influenced mainly by the pore sizes of solid adsorbents, and the adsorptive sites between the adsorbent-adsorbate systems. The present study confirms that the pore widths of activated carbons ranging from 7 to 15 Å allow us to obtain the best cooling performances. |
|---|