Study of Speed and Force in Biomanipulation

Study of Speed and Force in Biomanipulation

Ph.D

Saved in:

書目詳細資料
主要作者:	ZHOU SHENGFENG
其他作者:	MECHANICAL ENGINEERING
格式:	Theses and Dissertations
語言:	English
出版:	2014
主題:	microinjection, speed optimization, biomanipulation, force control, tensegrity model
在線閱讀:	http://scholarbank.nus.edu.sg/handle/10635/49372
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Speed optimization for micropipette motion during zebrafish embryo microinjection
由: Zhou, S., et al.
出版: (2014)

Force-controlled Biomanipulation for Biological Cell Mechanics Studies
由: NAM JOO HOO
出版: (2012)

Force Sensing and Control in Micromanipulation
由: LU ZHE
出版: (2010)

High-speed milling of titanium alloys: Modeling and optimization
由: WANG ZHIGANG
出版: (2010)

An overview of high-speed machining of titanium alloys
由: Rahman, M., et al.
出版: (2014)

CHARACTERISING THE FOOD WEB DYNAMICS AND TROPHIC CASCADE EFFECTS IN TROPICAL RESERVOIRS
由: LIM BOCK HING RAYSON
出版: (2022)

A review on high-speed machining of titanium alloys
由: Rahman, M., et al.
出版: (2014)

Designing a Tensegrity Form of an Outdoor Hydroponic System Utilizing Bamboo (Bambusoideae) and Abaca Fiber (Musa textilis)
由: Cabral, Lara Isabelle M., et al.
出版: (2021)

An investigation of cutting forces and surface damage in high-speed turning of Inconel 718
由: Pawade, R.S., et al.
出版: (2014)

Feedforward suppression of force ripple based on a simplex-optimized dither signal
由: Tan, K.K., et al.
出版: (2014)

Vehicular speed limiting control system in critical zones using global positioning system
由: Africa, Aaron Don M., et al.
出版: (2020)

A linear control approach to design digital speed control system for PMSMs
由: Yuan, Xin, et al.
出版: (2022)

VACUUM RABI SPLITTING IN A COMPACT NEAR-CONCENTRIC CAVITY
由: ADAM FLORENTIN THIERRY
出版: (2024)

Optimality properties of speed optimization for a vessel operating with time window constraint
由: Zhang, Zhibin, et al.
出版: (2019)

Multi-objective optimization of high-speed milling with parallel genetic simulated annealing
由: Wang, Z.G., et al.
出版: (2014)

An optimal speed control scheme supported by media servers for low-power multimedia applications
由: Huang, W., et al.
出版: (2013)

Inverse aerodynamic optimization considering impacts of design tip speed ratio for variable-speed wind turbines
由: Yang, Zhiqiang, et al.
出版: (2018)

Force sensing and control in micromanipulation
由: Lu, Z., et al.
出版: (2014)

A joint liner ship path, speed and deployment problem under emission reduction measures
由: Zhuge, Dan, et al.
出版: (2022)

Motions with minimal joint speeds and joint accelerations for redundant manipulators
由: Lee, H.P.
出版: (2014)

PID control system in maintaining constant rotational speed in savonius wind turbine
由: Borjal, Robert L., et al.
出版: (2010)

Chemical treatment of waste abaca for natural fiber-reinforced geopolymer composite
由: Malenab, Roy Alvin J., et al.
出版: (2017)

A hybrid cutting force model for high-speed milling of titanium alloys
由: Wang, Z.G., et al.
出版: (2014)

Automatic calibration and speed estimation on multi-directional vehicle flow
由: Ibarrientos, Chester Paul
出版: (2018)

Optimal spline data fitter and its application in the dynamic speed measurement of BLDC motor
由: Bi Chao, et al.
出版: (2016)

Formation of micromoulds via UV lithography of SU8 photoresist and nickel electrodeposition
由: Thian, S., et al.
出版: (2014)

Battery energy storage selection based on a novel intermittent wind speed model for improving power system dynamic reliability
由: Liang, Chen, et al.
出版: (2020)

Freeway traffic control using iterative learning control-based ramp metering and speed signaling
由: Hou, Z., et al.
出版: (2014)

Fuzzy unidirectional force control of constrained robotic manipulators
由: Huang, L., et al.
出版: (2014)

Automobile speed sensing system with data transmission and surveillance capabilities
由: Del Rosario, R-Jay Y., et al.
出版: (2014)

Concurrent adaptation of force and impedance in the redundant muscle system
由: Tee, K.P., et al.
出版: (2014)

Development of a regional map of extreme wind speeds in the Philippines
由: Garciano, Lessandro Estelito, et al.
出版: (2005)

Control and measurement of clamping and machining forces in intelligent fixturing
由: RAWTHER ASHIQUL HAMEED
出版: (2010)

DC motor position and speed tracking (PAST) system using neural networks
由: KISHORE DIGAMBER RANE
出版: (2010)

Prediction of the side drift force of full ships advancing in waves at low speeds
由: Liu, Shukui, et al.
出版: (2020)

Parallel force and motion control using robust velocity observer
由: Xia, Q.H., et al.
出版: (2014)

The cutting force measurement in a fixturing setup with instrumented locators
由: Hameed, R.A., et al.
出版: (2014)

Analyzing the impacts of the traveler information provision services and the speed limit control
由: Szeto, W.Y., et al.
出版: (2014)

Persistence and transcription of paternal mtDNA dependent on the delivery strategy rather than mitochondria source in fish embryos
由: Peng L., et al.
出版: (2019)

In vitro decondensation of mammalian sperm and subsequent formation of pronuclei-like structures for micromanipulation
由: Montag, M., et al.
出版: (2016)