Static strength of thick-walled CHS X-joints subjected to brace moment loadings

Static strength of thick-walled CHS X-joints subjected to brace moment loadings

10.1061/(ASCE)0733-9445(2007)133:9(1278)

Saved in:

書目詳細資料
Main Authors:	Qian, X.D., Choo, Y.S., Liew, J.Y.R., Wardenier, J.
其他作者:	CIVIL ENGINEERING
格式:	Article
出版:	2014
主題:	Bending Bracing Finite element method Hollow sections Joints
在線閱讀:	http://scholarbank.nus.edu.sg/handle/10635/66207
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!
機構:	National University of Singapore

相似書籍

Effects of boundary conditions and chord stresses on static strength of thick-walled CHS K-joints
由: Choo, Y.S., et al.
出版: (2014)

An Automatic FE Mesh Generator for CHS Tubular Joints
由: Qian, X.D., et al.
出版: (2014)

Static strength of thick-walled CHS X-joints - Part II. Effect of chord stresses
由: Choo, Y.S., et al.
出版: (2014)

Static strength of thick-walled CHS X-joints - Part I. New approach in strength definition
由: Choo, Y.S., et al.
出版: (2014)

Static strength of axially loaded EHS X-joints with braces welded to the narrow sides of the chord
由: Shen, W., et al.
出版: (2014)

Static strength of collar plate reinforced CHS X-joints loaded by in-plane bending
由: Choo, Y.S., et al.
出版: (2014)

Static strength of doubler plate reinforced CHS X-joints loaded by in-plane bending
由: Choo, Y.S., et al.
出版: (2014)

A uniform approach for the design of 100% CHS overlap joints
由: Qian, X., et al.
出版: (2014)

Structural Behavior of CHS T-Joints Subjected to Static In-Plane Bending in Fire Conditions
由: Fung, Tat Ching, et al.
出版: (2016)

Static strength of axially loaded elliptical hollow section X joints with braces welded to wide sides of chord. i: Numerical investigations based on experimental tests
由: Shen, W., et al.
出版: (2014)

The static strength of multiplanar tubular TX-joints under axial loading excluding the effects of overall chord bending moments
由: Van Der Vegte, G.J., et al.
出版: (2014)

Recent research on tubular joints with very thick-walled chords
由: Choo, Y.S., et al.
出版: (2014)

Static Strength of Doubler Plate Reinforced X-joints under Out-of-plane Bending
由: Liang, J.X., et al.
出版: (2014)

A load-deformation formulation for CHS X- and K-joints in push-over analyses
由: Qian, X., et al.
出版: (2014)

Recent developments in welded hollow section joint recommendations
由: Wardenier, J., et al.
出版: (2014)

Static strength of axially loaded elliptical hollow section X joints with braces welded to wide sides of chord. II: Parametric study and strength equations
由: Shen, W., et al.
出版: (2014)

Simulation of ductile fracture of circular hollow section joints using the Gurson model
由: Qian, X.D., et al.
出版: (2014)

Static Strength of Doubler Plate Reinforced X-joints Under In-Plane Bending
由: Choo, Y.S., et al.
出版: (2014)

Static strength of thick-walled CHS joints and global frame behavior
由: QIAN XUDONG
出版: (2010)

Static strength of T-joints reinforced with doubler or collar plates. II: Numerical simulations
由: Van Der Vegte, G.J., et al.
出版: (2014)

Crack driving force and ultimate strength of thick-walled CHS X-joints with near-toe cracks
由: Wang, X., et al.
出版: (2014)

Effectiveness of bilateral single-hinged knee bracing in osteoarthritis: A finite element study
由: Haris, Andi, et al.
出版: (2021)

Preliminary studies into the behaviour of knee braced frames subject to seismic loading
由: Balendra, T., et al.
出版: (2014)

Deterministic and reliability assessment of basal heave stability for braced excavations with jet grout base slab
由: Goh, Anthony Teck Chee
出版: (2017)

Re-evaluation of the moment capacity of CHS joints
由: Van der Vegte, G.J., et al.
出版: (2014)

STATIC STRENGTH OF DOUBLE-SKIN GROUTED X-JOINT INFILLED WITH HIGH STRENGTH GROUT
由: WAH YI FENG
出版: (2014)

MARS inverse analysis of soil and wall properties for braced excavations in clays
由: Zhang, Wengang, et al.
出版: (2019)

Advanced numerical and experimental techniques for analysis of dynamic responses and solder joint reliability during drop impact
由: Luan, J.-E., et al.
出版: (2014)

Ductile knee braced frames with shear yielding knee for seismic resistant structures
由: Balendra, T., et al.
出版: (2014)

Static strength variation of thick-walled CHS X-joints with different included angles and chord stress levels
由: Choo, Y.S., et al.
出版: (2014)

Performance of braced excavation in residual soil with groundwater drawdown
由: Zhang, W. G., et al.
出版: (2019)

Buckling strength of slender circular tubular steel braces strengthened by CFRP
由: Gao, X.Y., et al.
出版: (2014)

A load-deformation formulation with fracture representation based on the J-R curve for tubular joints
由: Qian, X., et al.
出版: (2014)

Experimental and numerical studies of austenitic stainless steel CHS stub columns after exposed to elevated temperatures
由: He, An, et al.
出版: (2021)

New reduction factor for cracked multi-planar square hollow section TT-, YT- and KT-joints
由: Lie, Seng Tjhen, et al.
出版: (2017)

Estimation of strut forces for braced excavation in granular soils from numerical analysis and case histories
由: Goh, Anthony Teck Chee, et al.
出版: (2019)

Web-based metal forming advisory system for the finite element analysis of sheet metal bending
由: Ling, Y.E., et al.
出版: (2014)

Web-based metal forming advisory system for the finite element analysis of sheet metal bending
由: Ling, Y.E., et al.
出版: (2014)

Neural network-based evaluation of scf distribution at the intersection of tubular X-joints
由: Choo, Y.S., et al.
出版: (2014)

Elastic-plastic crack driving force for tubular K-joints with mismatched welds
由: Qian, X., et al.
出版: (2014)