Fatigue performance of tubular X-joints with PJP+ welds: II - Numerical investigation

Fatigue performance of tubular X-joints with PJP+ welds: II - Numerical investigation

10.1016/j.jcsr.2013.07.003

Saved in:

書目詳細資料
Main Authors:	Qian, X., Nguyen, C.T., Petchdemaneengam, Y., Ou, Z., Swaddiwudhipong, S., Marshall, P.
其他作者:	CIVIL & ENVIRONMENTAL ENGINEERING
格式:	Article
出版:	2014
主題:	Multiple crack interaction Paris la Root crack Toe crack Tubular joint
在線閱讀:	http://scholarbank.nus.edu.sg/handle/10635/90972
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!
機構:	National University of Singapore

相似書籍

Fatigue performance of tubular X-joints with PJP+ welds: I - Experimental study
由: Qian, X., et al.
出版: (2014)

Fatigue and residual strength of concrete-filled tubular X-joints with full capacity welds
由: Qian, X., et al.
出版: (2014)

Prediction of the fatigue crack propagation in large-scale tubular joint specimens
由: Qian, X., et al.
出版: (2014)

Prediction of the fatigue crack propagation in large-scale tubular joint specimens
由: Qian, X., et al.
出版: (2014)

An eta-approach to evaluate the elastic-plastic energy release rate for weld-toe cracks in tubular K-joints
由: Zhang, Y., et al.
出版: (2014)

Overload effect on the fatigue crack propagation in large-scale tubular joints
由: Qian, X., et al.
出版: (2014)

Plasticity-Induced Fatigue Crack Closure For Structural Steels In Offshore Applications.
由: YUTHDANAI PETCHDEMANEENGAM
出版: (2012)

Fracture and Failure Assessment of Fatigue-Cracked Circular Hollow Section X-Joints
由: OU ZHIYONG
出版: (2013)

FE simulation on fatigue failure due to cracks initiated at corrosion zone
由: Chong, Kah Leong
出版: (2024)

Fatigue crack growth investigation on offshore pipelines with three-dimensional interacting cracks
由: Zhang, Yanmei, et al.
出版: (2018)

Ductile tearing assessment of high-strength steel X-joints under in-plane bending
由: Qian, X., et al.
出版: (2014)

Multi-crack dynamic interaction effect on oil and gas pipeline weld joints based on VCCT
由: Cui, Wei, et al.
出版: (2022)

Welder-optimized CJP-equivalency welds for tubular connections
由: Marshall, P., et al.
出版: (2014)

Welder-optimized CJP-equivalency welds for tubular connections
由: Marshall, P., et al.
出版: (2014)

Brittle failure caused by lamellar splitting in a large-scale tubular joint with fatigue cracks
由: Qian, X., et al.
出版: (2014)

Finite element analysis(FEA) of fatigue case studies
由: Azrullah Aminullah
出版: (2024)

Mode mixity for tubular K-joints with weld toe cracks
由: Qian, X., et al.
出版: (2014)

Modeling the crack interference in X80 oil and gas pipeline weld
由: Cui, Wei, et al.
出版: (2023)

Elastic-plastic crack driving force for tubular K-joints with mismatched welds
由: Qian, X., et al.
出版: (2014)

Elastic-plastic crack driving force for tubular X-joints with mismatched welds
由: Qian, X., et al.
出版: (2014)

Catalytic cracking of n-octane over y-type zeolite catalyst
由: Phanidar Jiratthitikan
出版: (2010)

Fracture analysis of load-carrying cruciform fillet welded joints with multiple cracks
由: Lie, Seng-Tjhen, et al.
出版: (2019)

Fatigue properties of a nanocrystalline titanium based bulk metallic glassy alloy
由: Okayasu, Mitsuhiro, et al.
出版: (2019)

Fatigue properties of a nanocrystalline titanium based bulk metallic glassy alloy
由: Okayasu, Mitsuhiro, et al.
出版: (2019)

Stress investigation on a cracked craze interacting with a nearby circular inclusion in polymer composites
由: Zhang, Yan Mei, et al.
出版: (2017)

Chloride-induced corrosion modelling of cracked reinforced SHCC
由: Paul, Suvash Chandra, et al.
出版: (2017)

Crack driving force and ultimate strength of thick-walled CHS X-joints with near-toe cracks
由: Wang, X., et al.
出版: (2014)

Fracture Response of Girth-Welded Pipeline With Canoe Shape Embedded Crack Subjected to Large Plastic Deformation
由: Lie, Seng Tjhen, et al.
出版: (2017)

EXTENSION OF η METHOD TO MEASURE CRACK DRIVING FORCE OF SURFACE-CRACKED CIRCULAR HOLLOW SECTION X-JOINT
由: ZHAN LINYUAN
出版: (2019)

FATIGUE INITIATION LIFE ASSESSMENT FOR OFFSHORE STRUCTURAL DETAILS
由: CHENG ZHIPING
出版: (2016)

Multiple cracking and strain-hardening criteria of Engineered Cementitious Composites (ECC) with river sand
由: Li, Yazhao, et al.
出版: (2024)

Failure Assessment Diagram (FAD) analysis of fatigue test results for X65 welded joints
由: Hoh, Hsin Jen, et al.
出版: (2018)

Semi-Analytic Solution of Multiple Inhomogeneous Inclusions and Cracks in an Infinite Space
由: Zhou, Kun, et al.
出版: (2016)

THE EFFECTIVE NOTCH STRESS APPROACH FOR FATIGUE ASSESSMENT OF WELDED TUBULAR JOINTS
由: MOCHAMAD RADITYA PRADANA
出版: (2017)

A model for mixed-mode fatigue
由: Tamilselvan, T., et al.
出版: (2014)

KI-T estimations for embedded flaws in pipes - Part I: Axially oriented cracks
由: Qian, X.
出版: (2014)

KI-T estimation for embedded flaws in pipes - Part II: Circumferentially oriented cracks
由: Qian, X.
出版: (2014)

CONSTRAINT-BASED FAILURE ASSESSMENT OF COPLANAR CRACKS IN PLATES AND PIPES UNDER TENSION
由: SEAH TEIK TIAN KELLY
出版: (2019)

Cracking of ferrocement due to restrained shrinkage
由: Ong, K.C.G., et al.
出版: (2014)

Mode mixity for circular hollow section X joints with weld toe cracks
由: Qian, X., et al.
出版: (2014)