Preparation of a poly(L-lactide-co -caprolactone) copolymer using a novel tin(II) alkoxide initiator and its fiber processing for potential use as an absorbable monofilament surgical suture

• Main Authors: Sujitra Ruengde, Jintana Siripitayananon, Robert Molloy, Runglawan Somsunan, Paul D. Topham, Brian J. Tighe
• 格式: 雜誌
• 出版: 2018
• 主題: Chemical Engineering; Chemistry; Materials Science
• 在線閱讀: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84954063898&origin=inward; http://cmuir.cmu.ac.th/jspui/handle/6653943832/55384
• 機構: Chiang Mai University

© 2016 Copyright Taylor & Francis Group, LLC. A poly(L-lactide-co-caprolactone) copolymer, P(LL-co-CL), of composition 75:25 mol% was synthesized via the bulk ring-opening copolymerization of L-lactide and ε-caprolactone using a novel bis[tin(II) monooctoate] diethylene glycol coordination-insertion initiator, OctSn-OCH2CH2OCH2CH2O-SnOct. The P(LL-co-CL) copolymer obtained was characterized by a combination of analytical techniques, namely nuclear magnetic resonance spectroscopy, gel permeation chromatography, dilute-solution viscometry, differential scanning calorimetry, and thermogravimetric analysis. For processing into a monofilament fiber, the copolymer was melt spun with minimal draw to give a largely amorphous and unoriented as-spun fiber. The fiber's oriented semicrystalline morphology, necessary to give the required balance of mechanical properties, was then developed via a sequence of controlled offline hot-drawing and annealing steps. Depending on the final draw ratio, the fibers obtained had tensile strengths in the region of 200-400 MPa.