Fabrication of double layers of aramid fiber/alumina/epoxy resin laminate composite using low-pressure technique

Fabrication of double layers of aramid fiber/alumina/epoxy resin laminate composite using low-pressure technique

An experimental investigation was carried out to study the fabrication of double layers of aramid fiber/alumina/epoxy resin laminate composites using low-pressure technique. To obtain the sample with high wear resistance property, the micron size of alumina particles were added into epoxy resin usin...

Saved in:

書目詳細資料
Main Authors:	W. Nhuapeng, S. Kumfu, W. Thamjaree, T. Tunkasiri
格式:	Book Series
出版:	2018
主題:	Engineering
在線閱讀:	https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=62949113746&origin=inward http://cmuir.cmu.ac.th/jspui/handle/6653943832/60352
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Fabrication of double layers of aramid fiber/alumina/epoxy resin laminate composite using low-pressure technique
由: Nhuapeng W., et al.
出版: (2014)

Mechanical properties and microstructure of aramid/Al2O 3/epoxy resin laminated composites
由: Kumfu S., et al.
出版: (2014)

Mechanical properties and microstructure of aramid/Al2O 3/epoxy resin laminated composites
由: S. Kumfu, et al.
出版: (2018)

Fabrication and mechanical properties of silicon carbide nanowires/epoxy resin composites
由: Nhuapeng W., et al.
出版: (2014)

Fabrication and mechanical properties of silicon carbide nanowires/epoxy resin composites
由: W. Nhuapeng, et al.
出版: (2018)

Fabrication of combined 0-3 and 1-3 connectivities PZT/epoxy resin composites
由: W. Thamjaree, et al.
出版: (2018)

Improvement in the tensile strength of epoxy resin and hemp/epoxy resin composites using carbon nanotubes
由: Longkullabutra H., et al.
出版: (2014)

Fabrication and bending property of fiber metal laminates using nanofillers modified epoxy resins
由: Heung, Cheuk Hei.
出版: (2011)

Improvement in the tensile strength of epoxy resin and hemp/epoxy resin composites using carbon nanotubes
由: Haruthai Longkullabutra, et al.
出版: (2018)

Fabrication and mechanical properties of carbon nanotubes/epoxy resin composites prepared by a sonication technique
由: Kumfu S., et al.
出版: (2014)

Fabrication and mechanical properties of carbon nanotubes/epoxy resin composites prepared by a sonication technique
由: S. Kumfu, et al.
出版: (2018)

EXPERIMENTAL AND COMPUTATIONAL ANALYSIS ON INTERLAMINAR SHEAR STRENGTH OF CARBON/EPOXY, GLASS/EPOXY, AND ARAMID/EPOXY COMPOSITES
由: Ismanto, Jonathan

Fabrication and low velocity impact properties of fibre metal laminates using nano-filler modified epoxy resins
由: Gn, Shawn Wende.
出版: (2011)

Fabrication of barium zirconium titanate ceramics using ultrasonic ball milling technique
由: W. Thamjaree, et al.
出版: (2018)

Fabrication of barium zirconium titanate ceramics using ultrasonic ball milling technique
由: Thamjaree W., et al.
出版: (2014)

Characterization and constitutive modeling of aramid fibers at high strain rates
由: Tan, V.B.C., et al.
出版: (2014)

Effect of roller pressure and base prepreg layer on tensile and flexural properties of CFRP laminates fabricated using automated fiber placement
由: Mathew, Eldho, et al.
出版: (2023)

Progressive failure analysis of scaled double-notched carbon/epoxy composite laminates
由: Pham, D.C., et al.
出版: (2014)

Mechanical properties of hemp fiber composites with carbon nanotubes reinforcement
由: Longkullabutra H., et al.
出版: (2014)

Mechanical properties of hemp fiber composites with carbon nanotubes reinforcement
由: H. Longkullabutra, et al.
出版: (2018)

Fabrication of 0-3 non-lead based piezoceramic/polymer composites using suction technique
由: Sareein T., et al.
出版: (2014)

Fabrication of 0-3 non-lead based piezoceramic/polymer composites using suction technique
由: T. Sareein, et al.
出版: (2018)

Epoxy resin surface functionalization using atmospheric pressure plasma jet treatment
由: Sangprasert W., et al.
出版: (2014)

Epoxy resin surface functionalization using atmospheric pressure plasma jet treatment
由: Sangprasert W., et al.
出版: (2014)

Fiber-matrix interactions in aramid-short-fiber-reinforced thermoplastic polyurethane composites
由: Chanthipa Vajrasthira, et al.
出版: (2018)

Fabrication and mechanical properties of the biocomposites between water hyacinth fiber and paper mulberry
由: Prapapan Khankham, et al.
出版: (2018)

Fabrication and mechanical properties of the biocomposites between water hyacinth fiber and paper mulberry
由: Prapapan Khankham, et al.
出版: (2018)

Epoxy resin surface functionalization using atmospheric pressure plasma jet treatment
由: Waleepan Sangprasert, et al.
出版: (2018)

Properties of SBR filled with carbon black and aramid pulp hybrid filler: Comparison between predispersed aramid pulpand conventional aramid pulp
由: Manuchet Nillawong, et al.
出版: (2018)

Ultraviolet/ozone continuous surface modification of pet fiber for reinforcing in epoxy resin
由: Paisan Khanchaitit
出版: (2012)

Alumina double-layered ultrafiltration membranes with enhanced water flux
由: He Z., et al.
出版: (2020)

Surface passivation of epoxy resin with a covalently adhered poly (tectrafluoroethylene) layer
由: Yu, Z.J., et al.
出版: (2014)

The elastic impact response of glass/epoxy laminated ogival shells
由: Shim, V.P.W., et al.
出版: (2014)

Grafting of acrylamide and acrylic acid onto polyethylene fiber for improved adhesion to epoxy resin
由: Taweechai Amornsakchai, et al.
出版: (2018)

Morphology, tensile and fracture characteristics of epoxy-alumina nanocomposites
由: Lim, S.H., et al.
出版: (2014)

Synthesis and Micro-Mechanical Properties Of Epoxy-Alumina Nanocomposites
由: LIM SHEAU HOOI
出版: (2011)

Comparative study of natural rubber and acrylonitrile rubber reinforced with aligned short aramid fiber
由: Pitchapa Pittayavinai, et al.
出版: (2018)

Holey reduced graphene oxide scaffolded heterocyclic aramid fibers with enhanced mechanical performance
由: Li, Jiaqiang, et al.
出版: (2022)

The fabrication of hollow fiber membranes with double-layer mixed-matrix materials for gas separation
由: Widjojo, N., et al.
出版: (2014)

RESIDUAL STRESS IN EPOXY RESIN SYSTEMS
由: XIE HONG
出版: (2019)