Modeling of radial gap formed by material dissolution in simultaneous micro-EDM and micro-ECM drilling using deionized water

by Nguyen, M.D., Rahman, M., Wong, Y.S.
Published 2014

An experimental study on micro-EDM in low-resistivity deionized water using short voltage pulses

by Nguyen, M.D., Rahman, M., Wong, Y.S.
Published 2014

A review on high-speed machining of titanium alloys

by Rahman, M., Wang, Z.-G., Wong, Y.-S.
Published 2014

A review on the conventional and micro-electrodischarge machining of tungsten carbide

by Jahan, M.P., Rahman, M., Wong, Y.S.
Published 2014

Ultraprecision machining of micro-structured functional surfaces on brittle materials

by Yu, D.P., Wong, Y.S., Hong, G.S.
Published 2014

Modelling and experimental investigation on the effect of nanopowder-mixed dielectric in micro-electrodischarge machining of tungsten carbide

by Jahan, M.P., Rahman, M., Wong, Y.S.
Published 2014

Experimental investigations into the influence of major operating parameters during micro-electro discharge drilling of cemented carbide

by Jahan, M.P., Wong, Y.S., Rahman, M.
Published 2014

Flank wear measurement by a threshold independent method with sub-pixel accuracy

by Wang, W.H., Hong, G.S., Wong, Y.S.
Published 2014

Framework of a computer-aided short-run SPC planning system

by Zhu, Y.D., Wong, Y.S., Lee, K.S.
Published 2014

Enhanced surface integrity and dimensional accuracy by simultaneous micro-ED/EC milling

by Nguyen, M.D., Rahman, M., Wong, Y.S.
Published 2014

High-speed milling of titanium alloys using binderless CBN tools

by Wang, Z.G., Wong, Y.S., Rahman, M.
Published 2014

Strategic work-place male support in uptake of women's breast cancer screening: translation of advocacy research into organisational & individual change

by Wong, Y.L., Wong, L.P., Ang, E.S., Low, W.Y.
Published 2010

Investigating intraspecific variation of Ralstonia solanacearum strains in West Malaysia using whole cell fatty acid analysis

by Khakvar, Reza, Sijam, Kamaruzaman, Radu, Son, Thong, Kwai Lin, Wong, Y.
Published 2007

The effects of different sonication times of nickel oxide and zirconium oxide catalysts in syngas production

by Wong, Y. C., W. A., Wan Nurdiyana, Yun Hin, Taufiq Yap
Published 2018

Feature analysis in tool condition monitoring: A case study in titanium machining

by Sun, J., Wong, Y.S., Hong, G.S., Rahman, M.
Published 2014

Optimization of cutting conditions for multi-pass turning operations using sequential quadratic programming

by Chua, M.S., Loh, H.T., Wong, Y.S., Rahman, M.
Published 2014

Towards crack minimisation of EDMed surfaces

by Lee, L.C., Lim, L.C., Wong, Y.S.
Published 2014

Modelling, Analysis and Fabrication of Below-knee Prosthetic Sockets Using Rapid Prototyping

by Fuh, J.Y.H., Feng, W., Wong, Y.S.
Published 2014

An intelligent sensor system approach for reliable tool flank wear recognition

by Niu, Y.Y.M., Wong, Y.S., Hong, G.S.
Published 2014

An interpolation scheme for tool-radius compensated parabolic paths for CNC

by Chai, O.H., Wong, Y.S., Poo, A.N.
Published 2014