Flutter of composite wing by finite element analysis

by Abdul Latif, Ainullotfi
Published 2013

Kaedah unsur terhingga : pengenalan asas untuk jurutera edisi kedua

by Abdul Latif, Ainullotfi (Penterjemah)
Published 1997

Validation of UAV wing structural model for finite element analysis

by Kanesan, Gunasegaran, Mansor, Shuhaimi, Abdul-Latif, Ainullotfi
Published 2014

Aerodynamic damping and stiffness determination for aircraft wing flutter speed analysis

by Mansor, Shuhaimi, Boo, Koon Yan, Abdul Latif, Ainullotfi
Published 2015

Composite wing flutter analysis with variations of ribs location

by Zaki, Nurul Zubaidah, Abdul Latif, Ainullotfi, Mansor, Shuhaimi
Published 2020

A state approach to the management of concurrent design task design of symmetrical woble plate compressor

by Ong, K. L., Musa, Md. Nor, Abdul Latif, Ainullotfi
Published 2004

Glosari kejuruteraan aeronautik

by Mohd. Jaafar, Mohammad Nazri, Muhammad, Sallehuddin, Mansor, Shuhaimi, Abdul Latif, Ainullotfi
Published 1999

Damage and fracture mechanics-based design methodology: rate-dependent constitutive and damage models for steel sheet metals

by Tamin, Mohd. Nasir, Abdul-Latif, Ainullotfi, Ayob, Amran, Kamsah, Nazri, Prawoto, Yunan
Published 2011

Reynolds number effects on flow topology above blunt-edge delta wing VFE-2 configurations

by Said, Mazuriah, Mat, Shabudin, Mansor, Shuhaimi, Abdul Latif, Ainullotfi, Mat Lazim, Tholudin
Published 2015

Superaugmented pitching motion of UTM CAMAR UAV using advanced flying handling qualities

by Mansor, Shuhaimi, Nogoud, Yasser, Mat, Shabudin, Dahalan, Md. Nizam, Abdul-latif, Ainullotfi
Published 2017

Representative cell analysis for damage-based failure model of polymer hexagonal honeycomb structure under the out-of-plane loadings

by Khan, Muhammad Salman, Abdul Latif, Ainullotfi, Koloor, Seyed Saeid Rahimian, Petru, Michal, Tamin, Mohd. Nasir
Published 2021

Deformation response of steel sheet metal under transverse impact loading

by Arsad, S.S, Noh, S. N. S. S., Ayob, Amran, Ahmad, Zaini, Abdul Latif, Ainullotfi, Kamsah, Nazri, Tamin, Mohd. Nasir
Published 2012

Experimental investigation on blunt-edged UTM delta wing VFE-2 configurations at low reynolds number

by Daman Huri, Muhammad Zal Aminullah, Mat, Shabudin, Said, Mazuriah, Mansor, Shuhaimi, Dahalan, Md. Nizam, Abdul-Latif, Ainullotfi
Published 2018

Piston ring assembly for a new natural gas vehicle symmetrical multistage wobble-plate compressor

by Arafat, Andril, Ahmad, Zair Asrar, Syahrom, Ardiyansyah, Mohd. Ainon, Nor Ilham, Musa, Md. Nor, Abdul Latif, Ainullotfi, Wan Mat, Wan Ali
Published 2006

Propellant development for small rockets

by Rahmat, Mohd. Zaki Yamani, Mohd. Jaafar, Mohammad Nazri, Abdul-Latif, Ainullotfi, Wan Ali, Wan Khairuddin, Mat Yajid, Zuriana Mariati, Kimsin, Intan Noryanah
Published 2008

Effect of skin and spar laminate orientations on flutter of composite uav wing

by Zaki, Nurul Zubaidah, Mazaha, Fareed A., Abdul Latif, Ainullotfi, Mansor, Shuhaimi, Ab. Wahid, Mastura, Dahalan, Nizam, Othman, Norazila, Mat, Shabudin, Mohd. Nasir, Mohd. Nazri
Published 2019

Burning rate studies on solid propellant

by Mohd. Jaafar, Mohammad Nazri, Kimsin, Intan Noryanah, Rahmat, Mohd. Zaki Yamani, Wahab, Mohd. Muzamil, Abdul-Latif, Ainullotfi, Wan Ali, Wan Khairuddin, Mat Yajid, Zuriana Mariati
Published 2008

Aircraft trajectory optimization during descent using a Kriging-model-based-genetic algorithm

by Othman, Norazila, Mansor, Shuhaimi, Ab. Wahid, Mastura, Abdul Latif, Ainullotfi, Wan Omar, Wan Zaidi, Mohd. Jaafar, Mohammad Nazri, Wan Ali, Wan Khairuddin, Dahalan, Md. Nizam, Mohd. Nasir, Mohd. Nazri, Kanazaki, Masahiro
Published 2018

Wind tunnel experiment of UTM-LST generic light aircraft model with external store

by Abdul Manaf, Muhammad Zaki, Mat, Shabudin, Mansor, Shuhaimi, Nasir, Mohd. Nazri, Mat Lazim, Tholudin, Wan Ali, Wan Khairuddin, Wan Omar, Wan Zaidi, Mohd. Ali, Zurriati, Abdul-Latif, Ainullotfi, Abd. Wahid, Mastura, Dahalan, Md. Nizam, Othman, Norazila
Published 2018