Development od novel polymer composite beam applying for acetabular cup prosthesis

by Abdullah, Mohamed Ruslan
Published 2011

Effect of coupling agent on mechanical and biological properties of polyetheretherketone/hydroxyapatite bioactive composite for prosthetic medical device

by Abdullah, Mohamed Ruslan
Published 2011

The high-velocity impact response of thermoplastic-matrix fibre-metal laminates

by Abdullah, Mohamed Ruslan, Cantwell, Wesley J.
Published 2012

Flexural and tensile behavior of kenaf fibre composite materials

by Abdi, Behzad, Azwan, S., Abdullah, Mohamed Ruslan, Ayob, Amran
Published 2013

Interfacial fracture of the fibre-metal laminates based on fibre reinforced thermoplastics

by Abdullah, Mohamed Ruslan, Prawoto, Yunan, Cantwell, Wesley James
Published 2015

Characterization of Hybrıd Yarn / Fabrıcs From of Kenaf-Kevlar Fibers / Sharoul Jambari ... [et al.]

by Jambari, Sharoul, Yahya, Mohd Yazid, Abdullah, Mohamed Ruslan
Published 2018

Crashworthiness capability of thin-walled fibre metal laminate tubes under axial crushing

by Ahmad, Z., Ahmad Mansor, Mazlan, Abdullah, Mohamed Ruslan
Published 2022

Effect of strain rate on indentation behaviour of kenaf-based fibre metal laminates

by Pang, Chi Loog, Abu Husain, Nurulakmar, Abdullah, Mohamed Ruslan
Published 2014

Experimental and numerical studies of fiber metal laminate (FML) thin-walled tubes under impact loading

by Ahmad, Zaini, Abdullah, Mohamed Ruslan Uslan, Tamin, Mohd. Nasir
Published 2015

Effect of a coupling agent on mechanical and biological properties of polyetheretherketone/hydroxyapatite bioactive composite for prosthetic medical device

by Rashidi, A. R., Wahit, Mat Uzir, Abdullah, Mohamed Ruslan
Published 2011

Effect of coupling agent on mechanical and biological properties of polyetheretherketone/hydroxypatite bioactive composite for prosthetic medical device

by Rashidi, Ahmad Ramli, Wahit, Mat Uzir, Abdullah, Mohamed Ruslan
Published 2011

Characterization of hybrid yarn/fabrics from of Kenaf-Kevlar fibers

by Jambari, Sharoul, Yahya, Mohd. Yazid, Abdullah, Mohamed Ruslan, Jawaid, Mohammed
Published 2018

Characterization of hybrid yarn/fabrics from of kenaf-kevlar fibers

by Jawaid, Mohammad, Jambari, Sharoul, Yahya, Mohd Yazid, Abdullah, Mohamed Ruslan
Published 2018

Indentation fracture behaviour of fibre metal laminates based on kenaf/epoxy

by Abdullah, Mohamed Ruslan, Pang, C. L., Abu Husain, Nurulakmar, Abdi, Behzad
Published 2013

Comparison of foam core sandwich panel and through-thickness polymer pin-reinforced foam core sandwich panel subject to indentation and flatwise compression loadings

by Abdi, Behzad, Azwan, S., Abdullah, Mohamed Ruslan, Ayob, Amran, Yahya, Mohd. Yazid
Published 2016

Processing of a multi-layer polyetheretherketone composite for use in acetabular cup prosthesis

by Abdullah, Mohamed Ruslan, Goharian, Amirhossein, Abdul Kadir, Mohammed Rafiq, Wahit, Mat Uzir
Published 2014

Biomechanical and bioactivity concepts of polyetheretherketone composites for use in orthopedic implants - A review

by Abdullah, Mohamed Ruslan, Goharian, Amirhossein, Abdul Kadir, Mohammed Rafiq, Wahit, Mat Uzir
Published 2015

Biomechanical and bioactivity concepts of polyetheretherketone composites for use in orthopedic implants : a review

by Abdullah, Mohamed Ruslan, Goharian, Amirhossein, Abdul Kadir, Mohammed Rafiq, Wahit, Mat Uzir
Published 2015

Experimental analysis of bending and tensile behaviour of aluminium-based fibre metal laminates

by Abu Husain, Nurulakmar, Chi, Loog Pang, Abdullah, Mohamed Ruslan, Abu Bakar, M. A.
Published 2013

The effect of silane on the biomechanical properties of PEEK/HA composite

by Rashidi, Ahmad Ramli, Wahit, Mat Uzir, Abdullah, Mohamed Ruslan, Abdul Kadir, Mohammed Rafiq
Published 2015