Makmal-Atas-Cip dengan medan magnet berkecerunan tinggi bagi aplikasi pengasingan sel biologi

by Abidin, Ummikalsom
Published 2016

Optimization of constructal design of a microchannel heat sink

by Abidin, Ummikalsom
Published 2006

Entropy generation minimization analysis of a microchannel

by Abidin, Ummikalsom, Mohd. Ghazali, Normah
Published 2008

Polydimethylsiloxane microchannel fabrication from 3d printed mold

by Abidin, Ummikalsom, Rusli, Muhammad Qadri
Published 2018

Self-powered infusion micropump fabrication using xurography and thermal lamination techniques

by Idris, Zul Fadhli, Abidin, Ummikalsom, Md. Sunhazim, Nur Shamimi Amirah
Published 2022

Different behaviors of friction in open and closed forging test utilizing palm oil-based lubricants

by Yahaya, Aiman, Samion, Syahrullail, Abidin, Ummikalsom, Abdul Hamid, Mohd. Kameil
Published 2023

Modelling the tribological performance of palm mid olein in cold forging test using deform-3D

by Yahaya, Aiman, Samion, Syahrullail, Abidin, Ummikalsom, Nor Musa, Nor Musa, Hamid, Kameil
Published 2023

Effect of Tert-Butylhydroquinone on tribological performance of palm oil lubricant and aluminium plate using linear reciprocating tribometer

by Ojaomo, Koleola Ebenezer, Samion, Syahrullail, Mohd. Yusop, Mohd. Zamri, Abidin, Ummikalsom, Paiman, Zulhanafi
Published 2023

Thermal and hydrodynamic performance of a microchannel heat sink with carbon nanotube nanofluids: effect of concentration and channel section

by Mohd. Ghazali, Normah, Estelle, Patrice, Halelfadl, Salma, Mare, Thierry, Tng, Choon Siong, Abidin, Ummikalsom
Published 2019

Effect of channel arrangement on the thermal hydraulic performance of multilayer microchannel arrays

by Kamaruzaman, Natrah, Wisley, Mohd. Farhan, Abidin, Ummikalsom, Mohd. Sies, Mohsin, Mohd. Ruslan, Mohd. Ridhwan
Published 2020

Predictive numerical analysis on the mixing characteristics in a rotating detonation engine (RDE)

by Rahman, Mohammad Nurizat, Abdul Wahid, Mazlan, Mohd. Yasin, Mohd. Fairus, Abidin, Ummikalsom, Mazlan, Muhammad Amri
Published 2021

Characterization of fluid flow through porous media

by Md. Sunhazim, Nur Shamimi Amirah, Norhaidi, Ummi Aqila, Muhammad Yazid, Muhammad Afiq Witri, Mohd. Zawawi, Fazila, Abidin, Ummikalsom
Published 2022

CFD investigation on the jet-engine inspired wind turbine

by Md. Sunhazim, Nur Shamimi Amirah, Mohd. Zawawi, Fazila, Abidin, Ummikalsom, Samion, Syahrullail, Ismail, Kamarulafizam, Ismail, Ainaa Maya Munira
Published 2022

Optimizing mixing ratio of multi-walled carbon nanotubes and titanium dioxide: A green approach to high-performance hybrid nanofluids for heat transfer

by Alfellag, Mohanad A., Kamar, Haslinda Mohamed, Abidin, Ummikalsom, Kazi, Salim Newaz, Sidik, Nor Azwadi Che, Muhsan, Ali S., Alawi, Omer A.
Published 2024

Optimizing mixing ratio of multi-walled carbon nanotubes and titanium dioxide: A green approach to high-performance hybrid nanofluids for heat transfer

by Alfellag, Mohanad A., Kamar, Haslinda Mohamed, Abidin, Ummikalsom, Kazi, Salim Newaz, Sidik, Nor Azwadi Che, Muhsan, Ali S., Alawi, Omer A.
Published 2024

Rheological and thermophysical properties of hybrid nanofluids and their application in flat-plate solar collectors: a comprehensive review

by Alfellag, Mohanad A., Mohamed Kamar, Haslinda, Che Sidik, Nor Azwadi, Muhsan, Ali Samer, Kazi, Salim Newaz, Alawi, Omer A., Abidin, Ummikalsom
Published 2023

Effects of Staggered Array of Cubical Obstacles on Near- Ground Wind Environment and Air Quality

by Muhammad Yazid, Muhammad Noor Afiq Witri, Badar Sharif, Asyraf Sharif, Che Sidik, Nor Azwadi, Hanipah, M. H., Mohd Zawawi, Fazila, Abidin, Ummikalsom
Published 2019

Green synthesized clove-treated carbon nanotubes/titanium dioxide hybrid nanofluids for enhancing flat-plate solar collector performance

by Alfellag, Mohanad A., Kamar, Haslinda Mohamed, Abidin, Ummikalsom, Kazi, Salim Newaz, Alawi, Omer A., Muhsan, Ali S., Sidik, Nor Azwadi Che, Shaikh, Kaleemullah, Khan, Wajahat Ahmed
Published 2024