Effects of End Mill Clearance Angle on Surface Error for Machining Low Rigidity Aerospace Structure Component

by Raja, Izamshah, Abu Bakar, Mohd Hadzley, Mohd , amran, Sivarao, Subramonian
Published 2012

Effects of temperature on the formation of nitride surface layer via thermochemical gaseous nitriding process

by Paijan, Lailatul Harina, Mamat, Mohd Fauzi, Abu Bakar, Mohd Hadzley, Maleque, Abd
Published 2022

Effects of temperature on the formation of nitride surface layer via thermochemical gaseous nitriding process

by Paijan, Lailatul Harina, Maleque, Md. Abdul, Mamat, Mohd Fauzi, Abu Bakar, Mohd Hadzley
Published 2022

Analysis of Tool Performance during Ball-end Milling of Aluminium Alloy 6061-T6

by Kasim, Mohd Shahir, Sulaiman, Mohd Amri, Mohamad, Effendi, Abu Bakar, Mohd Hadzley, Minhat, Mohamad
Published 2014

Influence of thermal input on microstructure and wear properties of surface alloyed DSS with SiC by TIG melting techniques

by Paijan, Lailatul Harina, Mamat, Mohd Fauzi, Abu Bakar, Mohd Hadzley, Abd Aziz, Mohd Syafiq
Published 2024

Finite Element Model of Machining with High Pressure Coolant for Ti- 6Al-4V alloy

by Abu Bakar, Mohd Hadzley, Raja Abdullah, Raja Izamshah, Ahmad, Siti Sarah Madia, Mohamad Raffi, Nurul Fatin
Published 2013

Finite Element Model of Machining with High Pressure Coolant for Ti-6Al-4V alloy

by Abu Bakar, Mohd Hadzley, Raja Abdullah, Raja Izamshah, Ahmad, Siti Sarah Nadia, Mohammad Raffi, Nurul Fatin
Published 2012

Mechanical Properties of Polypropylene Composites Containing Polymer Fibers

by Md Ali, Mohd Amran, Raja, Izamshah, Abu Bakar, Mohd Hadzley, Sivarao, Subramonian, Hussein, Nur Izan Syahriah
Published 2012

Friction and wear analysis of ceramic cutting tool made from Alumina-Zirconia-Chromia

by Azhar, Anis Afuza, Abu Bakar, Mohd Hadzley, Tamin, Norfauzi, Azlan, Umar Al-Amani, Hassan, Muhammad Hafiz
Published 2020

Effects of End Mill Helix Angle on Accuracy for Machining Thin-Rib Aerospace Component

by RAJA ABDULLAH, RAJA IZAMSHAH, YAAKOB, MOHD YUHAZRI, Abu Bakar, Mohd Hadzley, Md Ali, Mohd Amran, Subramonian, Sivarao
Published 2013

Investigation of impact properties under instrumented Charpy test

by Ali, Mohd Basri, Zainuddin, Hikmah, Zakaria, Kamarul Ariffin, Paijan, Lailatul Harina, Mamat, Mohd Fauzi, Abu Bakar, Mohd Hadzley
Published 2024

Evaluation of Curcuma Domestica Loir and Alpinia Galanga extract as an eco-friendly corrosion inhibitor for carbon steel in 0.5 M Hcl medium

by Mamat, Mohd. Fauzi, Saftu, Nur Adilah, Ismail, Mohamad Safwan, Paijan, Lailatul Harina, Abu Bakar, Mohd. Hadzley, Ab. Majid, Rohah
Published 2023

Effect of wall line count on the mechanical properties of FDM 3Dprinted PLA parts

by Paijan, Lailatul Harina, Hamzah, Aslam Hadi, Abu Bakar, Mohd Hadzley, Mamat, Mohd Fauzi, Maidin, Nurul Ain, Musa, Shahrul Irwan
Published 2024

Effect Of Sintering Temperature On Density, Hardness And Tool Wear For Alumina-Zirconia Cutting Tool

by Abu Bakar, Mohd Hadzley, Tamin, Nor Fauzi, Al-Amani, Umar, Azhar, Anis Afuza, Mokhtar, Muhammad Faiz, Hamed, Muhammad Fitri Naim
Published 2019

Surface Observation Of Hollow Tube Mat After Sintering And Cutting Process

by Abu Bakar, Mohd Hadzley, Raja Abdullah, Raja Izamshah, Md Ali, Mohd Amran, Yusoff, Wan Azahar, Wijeyesekera, Devapriya, Hasanah, Tuan Noor
Published 2014

Micro-influence of vacuum block positions on machinability of acrylic using hybrid vacuum clamping system

by Nassiruddin, Muhammad Amirul Adli, Ab Wahab, Norfariza, Abdul Razak, Muhamad Harezul, Azizzi, Muhammad Ridzuan, Abu Bakar, Mohd Hadzley, Sasahara, Hiroyuki
Published 2021

Investigation on Improvement of Surface Roughness Using Rotary Ultrasonic Assisted Machining Technique for Hardened Steel Material / Azlan Ramli...[et al.]

by Ramli, Azlan, Raja Abdullah, Raja Izamshah, Abu Bakar, Mohd Hadzley, Kasim, Mohd Shahir, A. Rahman, Muhamad Arfauz, Mohd Zakaria, Muhammad Akmal
Published 2017

Fabrication And Machining Performance Of Ceramic Cutting Tool Based On The Al2O3-ZrO2-Cr2O3 Compositions

by Abu Bakar, Mohd Hadzley, Tamin, Nor Fauzi, Azhar, Anis Afuza, Mokhtar, Muhammad Faiz, Hamed, Muhammad Fitri Naim, Azlan, Umar Al-Amani
Published 2019

Effect of laser parameters on the surface cleaning of galvanised steel by laser engraving process

by Abu Bakar, Mohd Hadzley, Ab Wahab, Norfariza, Azhar, Anis Afuza, Adam, Abdul Aziz, Herawan, Safarudin Gazali, Thongkaew, Kunlapat, Fairuz, M. R.
Published 2021

Taguchi optimization of hardness properties and study the effect on microstructural features of SiC reinforced composite coating duplex stainless steel

by Paijan, Lailatul Harina, Ali, Mohd Basri, Mamat, Mohd Fauzi, Abu Bakar, Mohd Hadzley, Osman, Mohd Hairizal, Abd Maleque, Asari, Mohd Rashidi
Published 2022