Utilization of response surface methodology for predicting and optimizing the physical properties of rubberized asphalt modified with nanosilica and waste denim fiber

by Al-Sabaeei, A.M., Safaeldeen, G.I., Napiah, M.
Published 2023

Prediction of oil and gas pipeline failures through machine learning approaches: A systematic review

by Al-Sabaeei, A.M., Alhussian, H., Abdulkadir, S.J., Jagadeesh, A.
Published 2023

Evaluation of measured and predicted resilient modulus of rubberized Stone Mastic Asphalt (SMA) modified with truck tire rubber powder

by Noura, S., Al-Sabaeei, A.M., Safaeldeen, G.I., Muniandy, R., Carter, A.
Published 2021

Aging and rheological properties of latex and crumb rubber modified bitumen using dynamic shear rheometer

by Al-Sabaeei, A.M., Mustofa, B.A., Sutanto, M.H., Sunarjono, S., Bala, N.
Published 2020

A systematic review of bio-asphalt for flexible pavement applications: Coherent taxonomy, motivations, challenges and future directions

by Al-Sabaeei, A.M., Napiah, M.B., Sutanto, M.H., Alaloul, W.S., Usman, A.
Published 2020

Statistical evaluation of moving observer method accuracy for measuring traffic flow variables on urban roads

by Al-Bahr, T., Che Puan, O., Hassan, S. A., Azhari, S. F., Al-Sabaeei, A. M., Mohammed, H. A.
Published 2021

Influence of nanosilica particles on the high-temperature performance of waste denim fibre-modified bitumen

by Al-Sabaeei, A.M., Napiah, M.B., Sutanto, M.H., Alaloul, W.S., Zoorob, S.E., Usman, A.
Published 2022

Influence of nanosilica particles on the high-temperature performance of waste denim fibre-modified bitumen

by Al-Sabaeei, A.M., Napiah, M.B., Sutanto, M.H., Alaloul, W.S., Zoorob, S.E., Usman, A.
Published 2020

Development of dead-end system calculation model for water reticulation design using Microsoft Excel with optimized algorithm: A case study at regional operations center (ROC) Mela...

by Lim, J.R., Kutty, S.R.M., Ghaleb, A.A.S., Almahbashi, N.M.Y., Al-Sabaeei, A.M.
Published 2020

Development of dead-end system calculation model for water reticulation design using Microsoft Excel with optimized algorithm: A case study at regional operations center (ROC) Mela...

by Lim, J.R., Kutty, S.R.M., Ghaleb, A.A.S., Almahbashi, N.M.Y., Al-Sabaeei, A.M.
Published 2020

Utilizing of oil shale ash as a construction material: A systematic review

by Salah Alaloul, W., Al Salaheen, M., Malkawi, A.B., Alzubi, K., Al-Sabaeei, A.M., Ali Musarat, M.
Published 2021

Statistical Evaluation of Moving Observer Method Accuracy for Measuring Traffic Flow Variables on Urban Roads

by Al-Bahr, T., Puan, O.C., Hassan, S.A., Azhari, S.F., Al-Sabaeei, A.M., Mohammed, H.A.
Published 2021

Utilizing graphene oxide in cementitious composites: A systematic review

by Murali, M., Alaloul, W.S., Mohammed, B.S., Musarat, M.A., Salaheen, M.A., Al-Sabaeei, A.M., Isyaka, A.
Published 2022

A statistical approach for pavement layer moduli backcalculation as a function of traffic speed deflections

by Mabrouk, G.M., Alrashydah, E., Masad, A., Elbagalati, O., Al-Sabaeei, A.M., Dessouky, S., Fuentes, L., Walubita, L.
Published 2022

Physicochemical, rheological and microstructural properties of Nano-Silica modified Bio-Asphalt

by Al-Sabaeei, A.M., Napiah, M., Sutanto, M., Alaloul, W., Md Yusoff, N.I., Imran Khan, M., Modibbo Saeed, S.
Published 2021

Mixture Design-Based Performance Optimization via Response Surface Methodology and Moisture Durability Study for Palm Oil Clinker Fine Modified Bitumen Asphalt Mixtures

by Yaro, N.S.A., Sutanto, M.H., Habib, N.Z., Napiah, M., Usman, A., Al-Sabaeei, A.M., Rafiq, W.
Published 2022

Waste Polyethylene Terephthalate granules modified by gamma irradiation and their effect as fine aggregates on moisture damage of asphalt mixtures

by Usman, A., Sutanto, M.H., Napiah, M., Al-Sabaeei, A.M., Yaro, N.S.A., Kumalasari, I., Saeed, S.M.
Published 2022

Feasibility Evaluation of Waste Palm Oil Clinker Powder as a Fillers Substitute for Eco-Friendly Hot Mix Asphalt Pavement

by Yaro, N.S.A., Sutanto, M.H., Habib, N.Z., Napiah, M., Usman, A., Al-Sabaeei, A.M., Rafiq, W.
Published 2022

Mixture Design-Based Performance Optimization via Response Surface Methodology and Moisture Durability Study for Palm Oil Clinker Fine Modified Bitumen Asphalt Mixtures

by Yaro, N.S.A., Sutanto, M.H., Habib, N.Z., Napiah, M., Usman, A., Al-Sabaeei, A.M., Rafiq, W.
Published 2022

Utilization of response surface methodology and machine learning for predicting and optimizing mixing and compaction temperatures of bio-modified asphalt

by Al-Sabaeei, A.M., Alhussian, H., Abdulkadir, S.J., Giustozzi, F., Napiah, M., Jagadeesh, A., Sutanto, M., Memon, A.M.
Published 2023