Support recycling in additive manufacturing: a case study for enhanced wear performance of Ti6Al4V alloy

by Yamanoglu, Ridvan, Bahador, Abdollah, Kondoh, Katsuyoshi
Published 2023

Tailoring microstructure and properties of a superelastic Ti–Ta alloy by incorporating spark plasma sintering with thermomechanical processing

by Bahador, Abdollah, Kariya, Shota, Umeda, Junko, Hamzah, Esah, Kondoh, Katsuyoshi
Published 2019

High-Brightness and High-Power Laser Welding of Powder Metallurgy Shape Memory Alloy: Welding-Parameter-Dependent Microstructure

by Bahador, Abdollah, Umeda, Junko, Mizutani, Masami, Hamzah, Esah, Yusof, Farazila, Kondoh, Katsuyoshi
Published 2020

Synergistic strengthening mechanisms of copper matrix composites with TiO2 nanoparticles

by Bahador, Abdollah, Umeda, Junko, Hamzah, Esah, Yusof, Farazila, Li, Xiaochun, Kondoh, Katsuyoshi
Published 2020

Strengthening evaluation and high-temperature behavior of ti–fe–o–cu–si alloy

by Bahador, Abdollah, Umeda, Junko, Yamanoglu, Ridvan, Abu Bakar, Tuty Asma, Kondoh, Katsuyoshi
Published 2021

Ultrafine-grain formation and improved mechanical properties of novel extruded Ti-Fe-W alloys with complete solid solution of tungsten

by Bahador, Abdollah, Umeda, Junko, Yamanoglu, Ridvan, Amrin, Astuty, Alhazaa, Abdulaziz, Kondoh, Katsuyoshi
Published 2021

Strengthening evaluation and high-temperature behavior of Ti–Fe–O–Cu–Si alloy

by Bahador, Abdollah, Umeda, Junko, Yamanoglu, Ridvan, Abu Bakar, Tuty Asma, Kondoh, Katsuyoshi
Published 2021

Effect of grain size on the tensile ductility and fracture mechanism of Ti–O alloys

by Kariya, Shota, Issariyapat, Ammarueda, Bahador, Abdollah, Umeda, Junko, Shen, Jianghua, Kondoh, Katsuyoshi
Published 2023

Asymmetric local strain, microstructure and superelasticity of friction stir welded Nitinol alloy

by Bahador, Abdollah, Umeda, Junko, Tsutsumi, Seiichiro, Hamzah, Esah, Yusof, Farazila, Fujii, Hidetoshi, Kondoh, Katsuyoshi
Published 2019

Strength–ductility balance of powder metallurgy Ti–2Fe–2W alloy extruded at high-temperature

by Bahador, Abdollah, Issariyapat, Ammarueda, Umeda, Junko, Yamanoglu, Ridvan, Pruncu, Catalin, Amrin, Astuty, Kondoh, Katsuyoshi
Published 2021

Influence of two-step austempering at different temperatures on mechanical and microstructural properties of AISI 9254 high silicon steel.

by Nalcaci, Burak, Baysun, Meltem, Bahador, Abdollah, Umeda, Junko, Münstermann, Sebastian, Kaya, Ali Arslan, Erdogan, Mehmet
Published 2023

Microwave sintering effects on the microstructure and mechanical properties of ti-51at%ni shape memory alloys

by Mustafa, Khaleel Ibrahim, Hamzah, Esah, Saud, Safaa N., Bahador, Abdollah, Engku Abu Bakar, Engku Mohammad Nazim
Published 2017

Heat-Conduction-Type and Keyhole-Type Laser Welding of Ti–Ni Shape-Memory Alloys Processed by Spark-Plasma Sintering

by Bahador, Abdollah, Hamzah, Esah, Kondoh, Katsuyoshi, Tsutsumi, Seiichiro, Umeda, Junko, Abu Bakar, Tuty Asma, Yusof, Farazila
Published 2018

Heat-conduction-type and keyhole-type laser welding of TiNi shape-memory alloys processed by spark-plasma sintering

by Bahador, Abdollah, Hamzah, Esah, Kondoh, Katsuyoshi, Tsutsumi, Seiichiro, Umeda, Junko, Abu Bakar, Tuty Asma, Yusof, Farazila
Published 2018

Deformation mechanism and enhanced properties of Cu–TiB2 composites evaluated by the in-situ tensile test and microstructure characterization

by Bahador, Abdollah, Junko, Umeda, Yamanoglu, Ridvan, Ghandvar, Hamidreza, Issariyapat, Ammarueda, Abu Bakar, Tuty Asma, Katsuyoshi, Kondoh
Published 2020

Microstructure examination and sliding wear behavior of al-15%mg2si-xgd in situ composites before and after hot extrusion

by Ghandvar, Hamidreza, Jabbar, Mostafa Abbas, Bahador, Abdollah, Abu Bakar, Tuty Asma, Fadil, Nor Akmal, Kondoh, Katsuyoshi
Published 2022

Room temperature and high-temperature properties of extruded Ti-4Fe-3W/2TiC composites in α+β and β phases

by Bahador, Abdollah, Yurtsever, Ayhan, Amrin, Astuty, Kariya, Shota, Umeda, Junko, Shen, Jianghua, Chen, Biao, Fukuma, Takeshi, Kondoh, Katsuyoshi
Published 2022

Microstructure refinement and strengthening mechanisms of additively manufactured Ti-Zr alloys prepared from pre-mixed feedstock

by Issariyapat, Ammarueda, Huang, Jeff, Takuma, Teramae, Shota, Kariya, Bahador, Abdollah, Visuttipitukul, Patama, Umeda, Junko, Alhazaa, Abdulaziz, Kondoh, Katsuyoshi
Published 2023

Microstructure and superelastic properties of free forged Ti–Ni shape-memory alloy

by Bahador, Abdollah, Hamzah, Esah, Kondoh, Katsuyoshi, Asma Abubakar, Tuty, Yusof, Farazila, Umeda, Junko, Saud, Safaa N., Ibrahim, Mustafa K.
Published 2018

The effects of annealing on microstructure and tensile properties of cold drawn steel wire

by Mohammad Rafix, Nur Alyani Nazirah, Fadil, Nor Akmal, Amrin, Astuty, Bahador, Abdollah, Wan Ali, Wan Fahmin Faiz, Salleh, Suhaimi
Published 2023